March 2003 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Mar 1 04:01:53 GMT 2003
Ending: Mon Mar 31 23:43:29 GMT 2003
Messages: 515

• [Diy_efi] TBI/CFI in Aus.   Mark Williams (MWP)
• [Diy_efi] EFI interface database   Mark Williams (MWP)
• [Diy_efi] Re: Small efi motors   Klaus Allmendinger
• [Diy_efi] peak-and-hold injector driver ic's   Klaus Allmendinger
• [Diy_efi] Re: peak-and-hold injector driver ic's   Klaus Allmendinger
• [Diy_efi] Re: peak-and-hold injector driver ic's   Klaus Allmendinger
• [Diy_efi] OT: tubular steel/space frame stress calcs   Allyn
• [Diy_efi] efi setup   D Armitt
• [Diy_efi] Eprom M38256   Electronica Del Automovil
• [Diy_efi] new EFI controller   Henning Baldersheim
• [Diy_efi] new EFI controller   Henning Baldersheim
• [Diy_efi] new EFI controller   Henning Baldersheim
• [Diy_efi] new EFI controller   Henning Baldersheim
• [Diy_efi] Test   Barry
• [Diy_efi] DIY Electronic Boost Controller   Barry
• [Diy_efi] Spray pattern for denso injectors   Grant Beaty
• [Diy_efi] Spray pattern for denso injectors   Grant Beaty
• [Diy_efi] OBD2 List?   Grant Beaty
• [Diy_efi] OBD2 List?   Grant Beaty
• [Diy_efi] Re: Minimalist micro based EFI ?   Grant Beaty
• [Diy_efi] Re: Minimalist micro based EFI ?   Grant Beaty
• [Diy_efi] No spark from my 2002 Maxima   Glen Binegar
• [Diy_efi] Motronic M1.3 (Peugeot 205 GTI)   Jan Boese
• [Diy_efi] EEC-V revisited..   Raymond Brantley
• [Diy_efi] EEC-V revisited..   Raymond Brantley
• [Diy_efi] EEC-V revisited..   Raymond Brantley
• [Diy_efi] DIY kit   Tony Bryant
• [Diy_efi] peak-and-hold injector driver ic's   Fran and Bud
• [Diy_efi] peak-and-hold injector driver ic's   Jean Bélanger
• [Diy_efi] peak-and-hold injector driver ic's   Jean Bélanger
• [Diy_efi] 402 TO 454 VORTEC CONVERSION   Larry L Carlson
• [Diy_efi] 402 TO 454 VORTEC CONVERSION   Larry L Carlson
• [Diy_efi] 402 TO 454 VORTEC CONVERSION   Larry L Carlson
• [Diy_efi] 402 TO 454 VORTEC CONVERSION   Larry L Carlson
• [Diy_efi] Re: injector current-feedback driver   Lasse Langwadt Christensen
• [Diy_efi] OBD2 List?   Eric Clark
• [Diy_efi] USABLE PARTS   Eddie M Cortez
• [Diy_efi] Crank sensor for knock detection?   J Creech
• [Diy_efi] OT: Looking for *DEAD* ECU   J Creech
• [Diy_efi] fuel map download   Nate Steele D.C.
• [Diy_efi] peak-and-hold injector driver ic's   Dave Dahlgren
• [Diy_efi] EEC-V revisited..   Dave Dahlgren
• [Diy_efi] RE: Timing and dyno pulls   Dave Dahlgren
• [Diy_efi] DIY kit   Matt Donohoe
• [Diy_efi] DIY kit   Joe Doty
• [Diy_efi] Re: Minimalist micro based EFI ?   Shannen Durphey
• [Diy_efi] USABLE PARTS   Shannen Durphey
• [Diy_efi] Crank sensor for knock detection?   Shannen Durphey
• [Diy_efi] timeframe to get equal fuel distribution   Shannen Durphey
• [Diy_efi] timeframe to get equal fuel distribution   Shannen Durphey
• [Diy_efi] pocket programmer   Shannen Durphey
• [Diy_efi] 402 TO 454 VORTEC CONVERSION   Shannen Durphey
• [Diy_efi] Re: Minimalist micro based EFI ?   Eck, Joel (Houston)
• [Diy_efi] 91 and newer 4.0 I-6 EFI   Eck, Joel (Houston)
• [Diy_efi] 402 TO 454 VORTEC CONVERSION   Eck, Joel (Houston)
• [Diy_efi] Ford chips   Martin - Elecauto
• [Diy_efi] EEC-IV questions   Elecauto-Martin
• [Diy_efi] EFI interface database   Jeffrey Engel
• [Diy_efi] timeframe to get equal fuel distribution   Jeffrey Engel
• [Diy_efi] PCMX users?   Jeffrey Engel
• [Diy_efi] PCMX users?   Jeffrey Engel
• [Diy_efi] Introduction, plus a question about map strategies   Jason Erickson
• [Diy_efi] traction control & nitrous (devlish combo?)   Mark Bowers & Family
• [Diy_efi] Re: Waveforms   Mark Bowers & Family
• [Diy_efi] injector current-feedback driver   Mark Bowers & Family
• [Diy_efi] injector current-feedback driver   Mark Bowers & Family
• [Diy_efi] injector current-feedback driver   Mark Bowers & Family
• [Diy_efi] DIY kit   Mark Bowers & Family
• [Diy_efi] Re: injector current-feedback driver   Mark Bowers & Family
• [Diy_efi] P/H hammer driver circuits   Mark Bowers & Family
• [Diy_efi] TBI/CFI in Aus.   Mark Bowers & Family
• [Diy_efi] new EFI controller   Mark Bowers & Family
• [Diy_efi] Peak cylinder pressure timing   Bernd Felsche
• [Diy_efi] Re: Small efi motors   Bernd Felsche
• [Diy_efi] Re: Small efi motors   Bernd Felsche
• [Diy_efi] Re: Minimalist micro based EFI ?   Bernd Felsche
• [Diy_efi] Re: Minimalist micro based EFI ?   Bernd Felsche
• [Diy_efi] Re: Minimalist micro based EFI ?   Bernd Felsche
• [Diy_efi] Re: Minimalist micro based EFI ?   Bernd Felsche
• [Diy_efi] Re: Minimalist micro based EFI ?   Bernd Felsche
• [Diy_efi] Crank sensor for knock detection?   Bernd Felsche
• [Diy_efi] fluid dynamics   Bernd Felsche
• [Diy_efi] timeframe to get equal fuel distribution   Bernd Felsche
• [Diy_efi] timeframe to get equal fuel distribution   Bernd Felsche
• [Diy_efi] timeframe to get equal fuel distribution   Bernd Felsche
• [Diy_efi] timeframe to get equal fuel distribution   Bernd Felsche
• [Diy_efi] timeframe to get equal fuel distribution   Bernd Felsche
• [Diy_efi] injector current-feedback driver   Marcell Gal
• [Diy_efi] Re: injector current-feedback driver   Marcell Gal
• [Diy_efi] Re: injector current-feedback driver   Marcell Gal
• [Diy_efi] injector driver revised   Marcell Gal
• [Diy_efi] Re: P/H hammer driver circuits   Marcell Gal
• [Diy_efi] Re: peak-and-hold injector driver ic's   Marcell Gal
• [Diy_efi] Re: new EFI controller   Marcell Gal
• [Diy_efi] Re: Minimalist micro based EFI ?   Marcell Gal
• [Diy_efi] Re: peak-and-hold injector driver ic's   Marcell Gal
• [Diy_efi] Re: new EFI controller   Marcell Gal
• [Diy_efi] Re: new EFI controller   Marcell Gal
• [Diy_efi] Re: new EFI controller   Marcell Gal
• [Diy_efi] Re: Crank sensor for knock detection?   Marcell Gal
• [Diy_efi] Re: new EFI controller   Marcell Gal
• [Diy_efi] Re: new EFI controller   Marcell Gal
• [Diy_efi] Re: Flyback Circuit: was new EFI controller   Marcell Gal
• [Diy_efi] Re: new EFI controller   Marcell Gal
• [Diy_efi] Re: new EFI controller   Marcell Gal
• [Diy_efi] Re: new EFI controller   Marcell Gal
• [Diy_efi] AVR Megasquirt group buy   Marcell Gal
• [Diy_efi] Re: DIY Electronic Boost Controller   Marcell Gal
• [Diy_efi] TBI/CFI in Aus.   Peter Gargano
• [Diy_efi] Are there Italians ?   Peter Gargano
• [Diy_efi] injector sequencing.   Gerard
• [Diy_efi] Audi Chip   Gerard
• [Diy_efi] Audi Chip   Gerard
• [Diy_efi] DIY Electronic Boost Controller   Gerard
• [Diy_efi] Audi Chip   Gerard
• [Diy_efi] SUCCESS! (was Re: LED changes brightness)   Philip V. Glazatov
• [Diy_efi] OT: tubular steel/space frame stress calcs   Mr. Goat
• [Diy_efi] Just a litlle question...   Miguel Gonzalez
• [Diy_efi] ESC needed without knock sensor?   Dan Griffin
• [Diy_efi] S10 Prom ID   Dan Griffin
• [Diy_efi] traction control & nitrous (devlish combo?)   Perry Harrington
• [Diy_efi] new EFI controller   Perry Harrington
• [Diy_efi] new EFI controller   Perry Harrington
• [Diy_efi] new EFI controller   Perry Harrington
• [Diy_efi] Re: Minimalist micro based EFI ?   Perry Harrington
• [Diy_efi] EEC-V revisited..   Perry Harrington
• [Diy_efi] Re: injector current-feedback driver   Greg Hermann
• [Diy_efi] peak-and-hold injector driver ic's   Greg Hermann
• [Diy_efi] peak-and-hold injector driver ic's   Greg Hermann
• [Diy_efi] peak-and-hold injector driver ic's   Greg Hermann
• [Diy_efi] P/H hammer driver circuits   Greg Hermann
• [Diy_efi] P/H hammer driver circuits   Greg Hermann
• [Diy_efi] new EFI controller   Greg Hermann
• [Diy_efi] new EFI controller   Greg Hermann
• [Diy_efi] new EFI controller   Greg Hermann
• [Diy_efi] new EFI controller   Greg Hermann
• [Diy_efi] new EFI controller   Greg Hermann
• [Diy_efi] new EFI controller   Greg Hermann
• [Diy_efi] Re: Minimalist micro based EFI ?   Greg Hermann
• [Diy_efi] Re: new EFI controller   Greg Hermann
• [Diy_efi] fluid dynamics   Greg Hermann
• [Diy_efi] efi conversion   Gene Holtzclaw
• [Diy_efi] efi conversion   Gene Holtzclaw
• [Diy_efi] efi conversion   Gene Holtzclaw
• [Diy_efi] efi conversion   Gene Holtzclaw
• [Diy_efi] 91 and newer 4.0 I-6 EFI   Gene Holtzclaw
• [Diy_efi] 91 and newer 4.0 I-6 EFI   Gene Holtzclaw
• [Diy_efi] 91 and newer 4.0 I-6 EFI   Gene Holtzclaw
• [Diy_efi] 91 and newer 4.0 I-6 EFI   Gene Holtzclaw
• [Diy_efi] Flyback Circuit: was new EFI controller   David Hooke
• [Diy_efi] water injection   Cal & Pat Hughes
• [Diy_efi] Re: Small efi motors   Phil Hunter
• [Diy_efi] Looking for Bosch MAF pin out   Chris Ice
• [Diy_efi] Looking for Bosch MAF pin out   Chris Ice
• [Diy_efi] Peak cylinder pressure timing   Erik Jacobs
• [Diy_efi] Re: Minimalist micro based EFI ?   Erik Jacobs
• [Diy_efi] Re: Minimalist micro based EFI ?   Erik Jacobs
• [Diy_efi] [ot] Console data logging display perhaps ;-)   Erik Jacobs
• [Diy_efi] Re: Minimalist micro based EFI ?   Erik Jacobs
• [Diy_efi] EFI interface database   Erik Jacobs
• [Diy_efi] EFI interface database   Erik Jacobs
• [Diy_efi] Crank sensor for knock detection?   Erik Jacobs
• [Diy_efi] Peak cylinder pressure timing   Hugh Keir
• [Diy_efi] Peak cylinder pressure timing   Hugh Keir
• [Diy_efi] Peak cylinder pressure timing   Hugh Keir
• [Diy_efi] Peak cylinder pressure timing   Hugh Keir
• [Diy_efi] Peak cylinder pressure timing   Hugh Keir
• [Diy_efi] Swap 305tbi to 350tbi in GM truck   Kevin
• [Diy_efi] Re:Are there Italians ?   Francisco Jose Kiss
• [Diy_efi] Peak cylinder pressure timing   Phil Lamovie
• [Diy_efi] Peak cylinder pressure timing   Phil Lamovie
• [Diy_efi] Re: Affordable accelerometer?   Richard M
• [Diy_efi] O2 sensor   Tyler Madia
• [Diy_efi] O2 sensor   Tyler Madia
• [Diy_efi]: ECU compatible with ISO14230 (KWP2000)   Vitaliy Maksimov
• [Diy_efi] BSFC Data   MarkoNTL
• [Diy_efi] EFI injector source   Marteney, Steve
• [Diy_efi] traction control & nitrous (devlish combo?)   The McConnell's
• [Diy_efi] traction control & nitrous (devlish combo?)   The McConnell's
• [Diy_efi] EEC-V revisited..   Ryan McCormick
• [Diy_efi] Peak cylinder pressure timing   Brian Michalk
• [Diy_efi] Peak cylinder pressure timing   Brian Michalk
• [Diy_efi] GMH Fuse Rail P/N 92030036, jpgs of alternative   Mike
• [Diy_efi] [ot] Supplier of MPX5500DP or MPX5700DP ?   Mike
• [Diy_efi] Re: Small efi motors   Mike
• [Diy_efi] Re: Small efi motors   Mike
• [Diy_efi] Minimalist micro based EFI ?   Mike
• [Diy_efi] new EFI controller   Mike
• [Diy_efi] Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] [ot] Console data logging display perhaps ;-)   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Re: Minimalist micro based EFI ?   Mike
• [Diy_efi] Crank sensor for knock detection?   Mike
• [Diy_efi] EFI interface database   Mike
• [Diy_efi] EFI interface database   Mike
• [Diy_efi] Crank sensor for knock detection?   Mike
• [Diy_efi] Crank sensor for knock detection?   Mike
• [Diy_efi] EFI interface database   Mike
• [Diy_efi] EFI interface database   Mike
• [Diy_efi] Crank sensor for knock detection?   Mike
• [Diy_efi] timeframe to get equal fuel distribution   Mike
• [Diy_efi] timeframe to get equal fuel distribution   Mike
• [Diy_efi] timeframe to get equal fuel distribution   Mike
• [Diy_efi] timeframe to get equal fuel distribution   Mike
• [Diy_efi] timeframe to get equal fuel distribution   Mike
• [Diy_efi] timeframe to get equal fuel distribution   Mike
• [Diy_efi] Looking for Bosch MAF pin out   Mike
• [Diy_efi] 402 TO 454 VORTEC CONVERSION   Mike
• [Diy_efi] Audi Chip   Mike
• [Diy_efi] Peak cylinder pressure timing   Mos
• [Diy_efi] Re: Minimalist micro based EFI ?   Mos
• [Diy_efi] Re: Minimalist micro based EFI ?   Mos
• [Diy_efi] Re: Minimalist micro based EFI ?   Mos
• [Diy_efi] timeframe to get equal fuel distribution   Mos
• [Diy_efi] EEC-IV questions   Daniel R. Nicoson
• [Diy_efi] coil (-) tach signal conditioning   Dennis Noordsij
• [Diy_efi] coil (-) tach signal conditioning   Dennis Noordsij
• [Diy_efi] coil (-) tach signal conditioning   Dennis Noordsij
• [Diy_efi] VB020 Ignitin Drivers   Maxime Nosek
• [Diy_efi] coil (-) tach signal conditioning   Joseph Obernberger
• [Diy_efi] Flowers ECU (in PA) repair contact information   PJR
• [Diy_efi] Multec II fuel injectors   PJR
• [Diy_efi] Re: injector current-feedback driver   Alexei Pavlov
• [Diy_efi] Re: injector current-feedback driver   Alexei Pavlov
• [Diy_efi] coil (-) tach signal conditioning   Alexei Pavlov
• [Diy_efi] coil (-) tach signal conditioning   Alexei Pavlov
• [Diy_efi] new guy   Alexei Pavlov
• [Diy_efi] new guy   Alexei Pavlov
• [Diy_efi]   Alexei Pavlov
• [Diy_efi] new EFI controller   Alexei Pavlov
• [Diy_efi] Motronic M1.3 (Peugeot 205 GTI)   Alexei Pavlov
• [Diy_efi] EFI interface database   Alexei Pavlov
• [Diy_efi] EFI interface database   Alexei Pavlov
• [Diy_efi] EFI interface database   Alexei Pavlov
• [Diy_efi] EFI interface database   Alexei Pavlov
• [Diy_efi] EFI interface database   Alexei Pavlov
• [Diy_efi] Re: new EFI controller   Alexei Pavlov
• [Diy_efi] Re: new EFI controller   Alexei Pavlov
• [Diy_efi] Crank sensor for knock detection?   Alexei Pavlov
• [Diy_efi] Re: new EFI controller   Alexei Pavlov
• [Diy_efi] Crank sensor for knock detection?   Alexei Pavlov
• [Diy_efi] Are there Italians ?   Alexei Pavlov
• [Diy_efi] Are there Italians ?   Alexei Pavlov
• [Diy_efi] timeframe to get equal fuel distribution   Alexei Pavlov
• [Diy_efi] Re:Are there Italians ?   Alexei Pavlov
• [Diy_efi] timeframe to get equal fuel distribution   Alexei Pavlov
• [Diy_efi] timeframe to get equal fuel distribution   Alexei Pavlov
• [Diy_efi] OT:timeframe to get equal fuel distribution   Alexei Pavlov
• [Diy_efi] Looking for Bosch MAF pin out   Alexei Pavlov
• [Diy_efi] timeframe to get equal fuel distribution   Alexei Pavlov
• [Diy_efi] Typical boosted ignition timings   Alexei Pavlov
• [Diy_efi] Typical boosted ignition timings   Alexei Pavlov
• [Diy_efi] Typical boosted ignition timings   Alexei Pavlov
• [Diy_efi] traction control & nitrous (devlish combo?)   Matt Porritt
• [Diy_efi] traction control & nitrous (devlish combo?)   Matt Porritt
• [Diy_efi] timeframe to get equal fuel distribution   Matt Porritt
• [Diy_efi] OT: tubular steel/space frame stress calcs   Mike Poulson
• [Diy_efi] OBD2 List?   Programmer
• [Diy_efi] Just a litlle question...   Programmer
• [Diy_efi] EEC-IV questions   Programmer
• [Diy_efi] Crank sensor for knock detection?   Programmer
• [Diy_efi] Crank sensor for knock detection?   Programmer
• [Diy_efi] EEC-V revisited..   Programmer
• [Diy_efi] EEC-V revisited..   Programmer
• [Diy_efi] Swap 305tbi to 350tbi in GM truck   Programmer
• [Diy_efi] Audi Chip   Programmer
• [Diy_efi] Audi Chip   Programmer
• [Diy_efi] Audi Chip   Programmer
• [Diy_efi] Audi Chip   Programmer
• [Diy_efi] Audi Chip   Programmer
• [Diy_efi] Crank sensor for knock detection?   PuffnSmoke
• [Diy_efi] Crank sensor for knock detection?   PuffnSmoke
• [Diy_efi] Crank sensor for knock detection?   PuffnSmoke
• [Diy_efi] Crank sensor for knock detection?   PuffnSmoke
• [Diy_efi] Crank sensor for knock detection?   PuffnSmoke
• [Diy_efi] Crank sensor for knock detection?   PuffnSmoke
• [Diy_efi] PCMX users?   Ken Retallick
• [Diy_efi] PCMX users?   Ken Retallick
• [Diy_efi] Typical boosted ignition timings   Marc Reviel
• [Diy_efi] Typical boosted ignition timings   Marc Reviel
• [Diy_efi] Typical boosted ignition timings   Marc Reviel
• [Diy_efi] Typical boosted ignition timings   Marc Reviel
• [Diy_efi] Typical boosted ignition timings   Marc Reviel
• [Diy_efi] traction control & nitrous (devlish combo?)   Axel Rietschin
• [Diy_efi] timeframe to get equal fuel distribution   Axel Rietschin
• [Diy_efi] new EFI controller   Bill SHURVINTON
• [Diy_efi] new EFI controller   Bill SHURVINTON
• [Diy_efi] Re: new EFI controller   Bill SHURVINTON
• [Diy_efi] Re: new EFI controller   Bill SHURVINTON
• [Diy_efi] 6801 chip   Sabale, Remy
• [Diy_efi] coil (-) tach signal conditioning   Tomas Sokorai Sch.
• [Diy_efi] coil (-) tach signal conditioning   Tomas Sokorai Sch.
• [Diy_efi] Re: coil -ve to square wave   Tomas Sokorai Sch.
• [Diy_efi] coil (-) tach signal conditioning   Tomas Sokorai Sch.
• [Diy_efi] 555 monostable for tach signal?   Tomas Sokorai Sch.
• [Diy_efi] Re: Small efi motors   Tomas Sokorai Sch.
• [Diy_efi] 91 and newer 4.0 I-6 EFI   Tomas Sokorai Sch.
• [Diy_efi] 91 and newer 4.0 I-6 EFI   Tomas Sokorai Sch.
• [Diy_efi] 91 and newer 4.0 I-6 EFI   Tomas Sokorai Sch.
• [Diy_efi] new EFI controller   Klaus R Schambeck
• [Diy_efi] new EFI controller   Klaus R Schambeck
• [Diy_efi] Re: new EFI controller   Klaus R Schambeck
• [Diy_efi] P/H hammer driver circuits   Carter Shore
• [Diy_efi] Re: COP/etc on 1275 A   Carter Shore
• [Diy_efi] efi conversion ( Triumph 2.5 )   Carter Shore
• [Diy_efi] Searching D-Jetronic injectors   Martin Snijders
• [Diy_efi] EEC-IV questions   Adrian R. Steele
• [Diy_efi] new guy   Richard Steinburg
• [Diy_efi] new guy   Richard Steinburg
• [Diy_efi] DIY kit   John W. Stewart
• [Diy_efi] Commands for DELPHI VI abs-system   Manfred Stuhlfelder
• [Diy_efi] Spray pattern for denso injectors   Toyota Supra
• [Diy_efi] DIY kit   Toyota Supra
• [Diy_efi] DIY kit (for mark b)   Toyota Supra
• [Diy_efi] Thanks to all that helped (schematic critique)   Toyota Supra
• [Diy_efi] new EFI controller   Toyota Supra
• [Diy_efi] new EFI controller   Toyota Supra
• [Diy_efi] Typical boosted ignition timings   Toyota Supra
• [Diy_efi] new EFI controller   Toyota Supra
• [Diy_efi] new EFI controller   Toyota Supra
• [Diy_efi] new EFI controller   Toyota Supra
• [Diy_efi] new EFI controller   Toyota Supra
• [Diy_efi] injector sequencing.   Toyota Supra
• [Diy_efi] Re: Minimalist micro based EFI ?   Toyota Supra
• [Diy_efi] USABLE PARTS   Toyota Supra
• [Diy_efi] timeframe to get equal fuel distribution   Toyota Supra
• [Diy_efi] timeframe to get equal fuel distribution   Toyota Supra
• [Diy_efi] timeframe to get equal fuel distribution   Toyota Supra
• [Diy_efi] timeframe to get equal fuel distribution   Toyota Supra
• [Diy_efi] timeframe to get equal fuel distribution   Toyota Supra
• [Diy_efi] Flowers ECU (in PA) repair contact information needed???   Toyota Supra
• [Diy_efi] To dwell or not to dwell...   William Taylor
• [Diy_efi] EEC-V revisited..   Justin Starkey at VMP
• [Diy_efi] EEC-V revisited..   Justin Starkey at VMP
• [Diy_efi] EEC-V revisited..   Justin Starkey at VMP
• [Diy_efi] EEC-V revisited..   Justin Starkey at VMP
• [Diy_efi] EFI questions and parts sources requests   Jack Vines
• [Diy_efi] EFI injector source   Jack Vines
• [Diy_efi] traction control & nitrous (devlish combo?)   Adam Wade
• [Diy_efi] Re: Waveforms   Adam Wade
• [Diy_efi] O2 sensor   Adam Wade
• [Diy_efi] O2 sensor   Adam Wade
• [Diy_efi] O2 sensor   Adam Wade
• [Diy_efi] injector current-feedback driver   Adam Wade
• [Diy_efi] peak-and-hold injector driver ic's   Adam Wade
• [Diy_efi] peak-and-hold injector driver ic's   Adam Wade
• [Diy_efi] P/H hammer driver circuits   Adam Wade
• [Diy_efi] Typical boosted ignition timings   Adam Wade
• [Diy_efi] efi setup (GPz1100)   Adam Wade
• [Diy_efi] Crank sensor for knock detection?   Adam Wade
• [Diy_efi] Crank sensor for knock detection?   Adam Wade
• [Diy_efi] timeframe to get equal fuel distribution   Adam Wade
• [Diy_efi] timeframe to get equal fuel distribution   Adam Wade
• [Diy_efi] timeframe to get equal fuel distribution   Adam Wade
• [Diy_efi] timeframe to get equal fuel distribution   Adam Wade
• [Diy_efi] COP   Adam Wade
• [Diy_efi] timeframe to get equal fuel distribution   Adam Wade
• [Diy_efi] timeframe to get equal fuel distribution   Adam Wade
• [Diy_efi] timeframe to get equal fuel distribution   Adam Wade
• [Diy_efi] COP   Adam Wade
• [Diy_efi] fluid dynamics   Adam Wade
• [Diy_efi] fluid dynamics   Adam Wade
• [Diy_efi] fluid dynamics   Adam Wade
• [Diy_efi] GPz1100 efi setup   Adam Wade
• [Diy_efi] timeframe to get equal fuel distribution   Adam Wade
• [Diy_efi] timeframe to get equal fuel distribution   Adam Wade
• [Diy_efi] timeframe to get equal fuel distribution   Adam Wade
• [Diy_efi] Re: Diy_efi Digest, Vol 3, Issue 14   Bill Washington
• [Diy_efi] Searching D-Jetronic injectors   Peter Webb
• [Diy_efi] peak-and-hold injector driver ic's   Bevan Weiss
• [Diy_efi] peak-and-hold injector driver ic's   Bevan Weiss
• [Diy_efi] peak-and-hold injector driver ic's   Bevan Weiss
• [Diy_efi] peak-and-hold injector driver ic's   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] P/H hammer driver circuits   Bevan Weiss
• [Diy_efi] peak-and-hold injector driver ic's   Bevan Weiss
• [Diy_efi] peak-and-hold injector driver ic's   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] Minimalist micro based EFI ?   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] Minimalist micro based EFI ?   Bevan Weiss
• [Diy_efi] new EFI controller   Bevan Weiss
• [Diy_efi] Re: Minimalist micro based EFI ?   Bevan Weiss
• [Diy_efi] Re: Minimalist micro based EFI ?   Bevan Weiss
• [Diy_efi] Re: Minimalist micro based EFI ?   Bevan Weiss
• [Diy_efi] Re: Minimalist micro based EFI ?   Bevan Weiss
• [Diy_efi] Re: Minimalist micro based EFI ?   Bevan Weiss
• [Diy_efi] Ford chips   Bevan Weiss
• [Diy_efi] tach input circuit   Bevan Weiss
• [Diy_efi] efi setup   Bevan Weiss
• [Diy_efi] USABLE PARTS   Bevan Weiss
• [Diy_efi] VB020 Ignitin Drivers   Bevan Weiss
• [Diy_efi] USABLE PARTS   Bevan Weiss
• [Diy_efi] Crank sensor for knock detection?   Bevan Weiss
• [Diy_efi] Re: new EFI controller   Bevan Weiss
• [Diy_efi] Re: new EFI controller   Bevan Weiss
• [Diy_efi] timeframe to get equal fuel distribution   Bevan Weiss
• [Diy_efi] timeframe to get equal fuel distribution   Bevan Weiss
• [Diy_efi] COP   Bevan Weiss
• [Diy_efi] timeframe to get equal fuel distribution   Bevan Weiss
• [Diy_efi] timeframe to get equal fuel distribution   Bevan Weiss
• [Diy_efi] COP   Bevan Weiss
• [Diy_efi] fluid dynamics   Bevan Weiss
• [Diy_efi] fluid dynamics   Bevan Weiss
• [Diy_efi] timeframe to get equal fuel distribution   Bevan Weiss
• [Diy_efi] timeframe to get equal fuel distribution   Bevan Weiss
• [Diy_efi] timeframe to get equal fuel distribution   Bevan Weiss
• [Diy_efi] Gas Injection lpg   Wes
• [Diy_efi] RE: Timing and dyno pulls   Dave Williams
• [Diy_efi] rally technology (was: traction control & nitrous)   Scott F. Williams
• [Diy_efi] EFI injector source   Scott F. Williams
• [Diy_efi] ESC needed without knock sensor?   Greg Wolfe
• [Diy_efi] ESC needed without knock sensor?   Greg Wolfe
• [Diy_efi] Re: Diy_efi Digest, Vol 3, Issue 15   Dan Zorde
• [Diy_efi] RE: new EFI controller   Dan Zorde
• [Diy_efi] DIY Electronic Boost Controller   a7r at andern.org
• [Diy_efi] Re: [ Diy_efi ] new EFI controller   BowTieVette at aol.com
• [Diy_efi] O2 sensor   Djfreggens at aol.com
• [Diy_efi] injector current-feedback driver   Djfreggens at aol.com
• [Diy_efi] peak-and-hold injector driver ic's   Djfreggens at aol.com
• [Diy_efi] EEC-IV questions   Djfreggens at aol.com
• [Diy_efi] Eprom M38256   Djfreggens at aol.com
• [Diy_efi] EEC-V revisited..   Djfreggens at aol.com
• [Diy_efi] Audi Chip   Djfreggens at aol.com
• [Diy_efi] pocket programmer   Ne14RoxCJ at aol.com
• [Diy_efi] efi conversion   Tlsalt at aol.com
• [Diy_efi] efi conversion   Tlsalt at aol.com
• [Diy_efi] efi conversion   Tlsalt at aol.com
• [Diy_efi] Winbin on Win2K   bbrennan at attbi.com
• [Diy_efi] Re: Motorola   BVicknair at bjservices.com
• [Diy_efi] tach input circuit   BVicknair at bjservices.com
• [Diy_efi] pocket programmer   JMSMAUTOMOTIVE at cs.com
• [Diy_efi] DIY kit   abnengineering at cs.com
• [Diy_efi] S10 Prom ID   don.broadus at exeloncorp.com
• [Diy_efi] S10 Prom ID   don.broadus at exeloncorp.com
• [Diy_efi] o2 sensor   gngrbrd_man
• [Diy_efi] peak-and-hold injector driver ic's   gngrbrd_man
• [Diy_efi] peak-and-hold injector driver ic's   gngrbrd_man
• [Diy_efi] VB020 Ignitin Drivers   gngrbrd_man
• [Diy_efi] timeframe to get equal fuel distribution   gngrbrd_man
• [Diy_efi] DIY kit   greg gravener
• [Diy_efi] pocket programmer   greg gravener
• [Diy_efi] DIY kit   fuelogic at ihug.com.au
• [Diy_efi] Re: coil -ve to square wave   fuelogic at ihug.com.au
• [Diy_efi]   fuelogic at ihug.com.au
• [Diy_efi]   fuelogic at ihug.com.au
• [Diy_efi]   fuelogic at ihug.com.au
• [Diy_efi] Re: Kit   fuelogic at ihug.com.au
• [Diy_efi] injector sequencing.   joeld
• [Diy_efi] timeframe to get equal fuel distribution   joeld
• [Diy_efi] timeframe to get equal fuel distribution   joeld
• [Diy_efi] Re: injector current-feedback driver   bcroe at juno.com
• [Diy_efi] Re: [WB-o2] LED changes brightness   bcroe at juno.com
• [Diy_efi] SUCCESS! (was LED changes brightness)   bcroe at juno.com
• [Diy_efi] DIY-WB Heater Ckt Upgrades   bcroe at juno.com
• [Diy_efi] Peak cylinder pressure timing   md4etal
• [Diy_efi] Re: Small efi motors   bill.shurvinton at nokia.com
• [Diy_efi] new EFI controller   bill.shurvinton at nokia.com
• [Diy_efi] Re: Minimalist micro based EFI ?   bill.shurvinton at nokia.com
• [Diy_efi] Re: Minimalist micro based EFI ?   bill.shurvinton at nokia.com
• [Diy_efi] Re: Minimalist micro based EFI ?   bill.shurvinton at nokia.com
• [Diy_efi] Re: Minimalist micro based EFI ?   bill.shurvinton at nokia.com
• [Diy_efi] Re: Minimalist micro based EFI ?   bill.shurvinton at nokia.com
• [Diy_efi] Re: new EFI controller   bill.shurvinton at nokia.com
• [Diy_efi] Re: new EFI controller   bill.shurvinton at nokia.com
• [Diy_efi] Re: new EFI controller   bill.shurvinton at nokia.com
• [Diy_efi] Re: new EFI controller   bill.shurvinton at nokia.com
• [Diy_efi] efi conversion   bill.shurvinton at nokia.com
• [Diy_efi] timeframe to get equal fuel distribution   bill.shurvinton at nokia.com
• [Diy_efi] timeframe to get equal fuel distribution   bill.shurvinton at nokia.com
• [Diy_efi] timeframe to get equal fuel distribution   bill.shurvinton at nokia.com
• [Diy_efi] timeframe to get equal fuel distribution   bill.shurvinton at nokia.com
• [Diy_efi] OT:timeframe to get equal fuel distribution   bill.shurvinton at nokia.com
• [Diy_efi] OT:timeframe to get equal fuel distribution   bill.shurvinton at nokia.com
• [Diy_efi] 16141470 wiring info   nsane77
• [Diy_efi] Re: injector current-feedback driver   Sid.Young at qml.com.au
• [Diy_efi] TBI/CFI in Aus.   Sid.Young at qml.com.au
• [Diy_efi] Suitable fuel pump   Sid.Young at qml.com.au
• [Diy_efi] new EFI controller - CPU selection   Sid.Young at qml.com.au
• [Diy_efi] efi setup   Sid.Young at qml.com.au
• [Diy_efi] wb-o2 logo?   steve ravet
• [Diy_efi] OBD2 List?   steve ravet
• [Diy_efi] OBD2 List?   steve ravet
• [Diy_efi] Peak cylinder pressure timing   steve ravet
• [Diy_efi] MC3484S2-1   steve ravet
• [Diy_efi] Suitable fuel pump   steve ravet
• [Diy_efi] ESC needed without knock sensor?   steve ravet
• [Diy_efi] 402 TO 454 VORTEC CONVERSION   steve ravet
• [Diy_efi] Swap 305tbi to 350tbi in GM truck   steve ravet
• [Diy_efi] timeframe to get equal fuel distribution   efi student
• [Diy_efi] timeframe to get equal fuel distribution   efi student
• [Diy_efi] timeframe to get equal fuel distribution   efi student
• [Diy_efi] new EFI controller   maier_markus at t-online.de

Last message date: Mon Mar 31 23:43:29 GMT 2003
Archived on: Thu May 30 06:04:19 GMT 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...