[Diy_efi] Spray pattern for denso injectors

[Toyota Supra]

the easiest way to do such, is to bolt the stock 550's to a supra head, in a 
stock rail. take a pump in a 5 gallon bucket and use the stock regulator 
with a foot pump.

this is what i did for my extra injector tests, to test to see which ones 
were leaking ( a couple of months back ) and it took about 30 minutes setup 
time, but worked great. i had all of the parts lying around though, i am not 
sure if you have all of those extra parts.

i did the same on the supra 550's, except i left them in the car and took 
the upper and lower intake manifold off. i wish i had taken pics for you, 
sorry. they spray onto the back of the valve

-j






From: "Grant Beaty" <gbeaty at ufl.edu>
>Reply-To: List for general do-it-yourself EFI talk <diy_efi at diy-efi.org>
>To: "List for general do-it-yourself EFI talk" <diy_efi at diy-efi.org>
>Subject: [Diy_efi] Spray pattern for denso injectors
>Date: Sat, 1 Mar 2003 17:14:26 -0500
>
>I'm specifically looking for the pattern of stock Toyota Supra (550cc 4
>valve side-feeds), but I'm guessing most densos are the same or very
>similar? Cone, mist, beam? Pics, description, or anything at all would 
>help.
>
>I'd really like to know the angle, but I guess thats difficult short of
>building an elaborate contraption....
>
>Thanks,
>Grant Beaty
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi


_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*  
http://join.msn.com/?page=features/junkmail


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi