[Diy_efi] EEC-V revisited..

[Ryan McCormick]

I have that book, it does have good basic EEC info in
it, but nothing that will help you.  IF you want to do
anything with the book, you have to buy Diablo
Ryan
 
--- Programmer <nwester at eidnet.org> wrote:
> I'd talk to someone who has actually bought the
> book. I've heard it's full
> of very light info...nothing that'll really help you
> get into this.
> 
> Lyndon
> 
> ----- Original Message -----
> From: "Perry Harrington" <pedward at apsoft.com>
> To: "List for general do-it-yourself EFI talk"
> <diy_efi at diy-efi.org>
> Sent: Tuesday, March 18, 2003 8:43 PM
> Subject: Re: [Diy_efi] EEC-V revisited..
> 
> 
> > The book that Diabo published has some iteresting
> bits about reflashing
> the
> > EEC-V ECUs.  They have a handheld programmer that
> does that instead of
> using
> > a J3 chip.
> >
> > --Perry
> >
> > On Tue, Mar 18, 2003 at 10:39:34PM -0500, Justin
> Starkey @ VMP wrote:
> > > right, they reflash eec5s reguarly
> > > the eec4s can be done too but its not really
> worth it to pull the prom
> and put it in a UV
> > > eraser, might as well just throw a chip on it
> > > Justin Starkey
> > > www.VelocityMustangPerformance.com
> > > **Quote Original E-Mail In Reply**
> > > ----- Original Message -----
> > > From: "Raymond Brantley"
> <raymond at iwantperformance.net>
> > > To: "'List for general do-it-yourself EFI talk'"
> <diy_efi at diy-efi.org>
> > > Sent: Tuesday, March 18, 2003 10:10 PM
> > > Subject: RE: [Diy_efi] EEC-V revisited..
> > >
> > >
> > > > Like Justin said Lyndon Fordchip has some
> serious Ford background.
> Jerry
> > > > is the main guy and brings HUGE amounts of
> experience to the table.
> > > >
> > > > I know they can and they have flashed EEC-V's
> for people.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Thanks,
> > > > Raymond
> > > > www.iwantperformance.net
> > > >
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: diy_efi-bounces at diy-efi.org
> [mailto:diy_efi-bounces at diy-efi.org]
> > > > On Behalf Of Programmer
> > > > Sent: Tuesday, March 18, 2003 4:18 PM
> > > > To: List for general do-it-yourself EFI talk
> > > > Subject: Re: [Diy_efi] EEC-V revisited..
> > > >
> > > >
> > > > Who are "fordchip" resellers for ? Diablo,
> Superchips, or... ?
> > > >
> > > > Lyndon
> > > >
> > > > ----- Original Message -----
> > > > From: "Raymond Brantley"
> <raymond at iwantperformance.net>
> > > > To: <ddahlgren at snet.net>; "'List for general
> do-it-yourself EFI talk'"
> > > > <diy_efi at diy-efi.org>
> > > > Sent: Tuesday, March 18, 2003 2:57 PM
> > > > Subject: RE: [Diy_efi] EEC-V revisited..
> > > >
> > > >
> > > > > Dave you are either going to need to contact
> Jerry at Fordchip.com.
> Or
> > > >
> > > > > purchase a Ford NGS, figure out how to hack
> the proprietary HEX
> files,
> > > >
> > > > > put them back in an NGS friendly format and
> then flash the PCM. The
> > > > > former idea is much cheaper :)
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Thanks,
> > > > > Raymond
> > > > >
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: diy_efi-bounces at diy-efi.org
> [mailto:diy_efi-bounces at diy-efi.org]
> > > > > On Behalf Of Dave Dahlgren
> > > > > Sent: Tuesday, March 18, 2003 3:23 PM
> > > > > To: diy_efi at diy-efi.org
> > > > > Subject: [Diy_efi] EEC-V revisited..
> > > > >
> > > > >
> > > > >  I have poured over the archives and found
> nothing new on EEC-V
> stuff
> > > > > and am about ready to look at commercial
> stuff, though have no idea
> > > > > where to start.
> > > > > What I need to do is tune the engine fuel
> and spark, and then flash
> > > > the
> > > > > factory
> > > > > ECM and have it look like I was never there.
> Is there anything that
> > > > will
> > > > > do
> > > > > this? no ad in boards has to be full on
> stealth. And yes it is for
> off
> > > > > road use
> > > > > as well, but still has to look factory fresh
> with no mods at all.
> > > > > Dave Dahlgren
> > > > >
> > > > >
> > > > >
> _______________________________________________
> > > > > Diy_efi mailing list
> > > > > Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi
> > > > >
> > > > >
> > > > >
> _______________________________________________
> > > > > Diy_efi mailing list
> > > > > Diy_efi at diy-efi.org
> > > > >
> http://www.diy-efi.org/mailman/listinfo/diy_efi
> > > >
> > > >
> > > >
> _______________________________________________
> > > > Diy_efi mailing list
> > > > Diy_efi at diy-efi.org
> > > >
> http://www.diy-efi.org/mailman/listinfo/diy_efi
> > > >
> > > >
> > > >
> > > >
> _______________________________________________
> > > > Diy_efi mailing list
> > > > Diy_efi at diy-efi.org
> > > >
> http://www.diy-efi.org/mailman/listinfo/diy_efi
> > >
> > >
> > > _______________________________________________
> > > Diy_efi mailing list
> > > Diy_efi at diy-efi.org
> > > http://www.diy-efi.org/mailman/listinfo/diy_efi
> >
> > --
> > Perry Harrington Data Acquisition &
> Instrumentation, Inc
> > perry at dainst dot com http://www.dainst.com/
> >
> > Those who would give up essential liberty to
> purchase a little temporary
> safety
> > deserve neither liberty or safety. Nor, are they
> likely to end up with
> either.
> >                              -- Benjamin Franklin
> >
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://www.diy-efi.org/mailman/listinfo/diy_efi
> 
> 
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi