[Diy_efi] EEC-V revisited..

Raymond Brantley raymond at iwantperformance.net
Tue Mar 18 21:58:11 GMT 2003


Dave you are either going to need to contact Jerry at Fordchip.com. Or
purchase a Ford NGS, figure out how to hack the proprietary HEX files,
put them back in an NGS friendly format and then flash the PCM. The
former idea is much cheaper :)




Thanks,
Raymond



-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
On Behalf Of Dave Dahlgren
Sent: Tuesday, March 18, 2003 3:23 PM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] EEC-V revisited..


 I have poured over the archives and found nothing new on EEC-V stuff
and am
about ready to look at commercial stuff, though have no idea where to
start.
What I need to do is tune the engine fuel and spark, and then flash the
factory
ECM and have it look like I was never there. Is there anything that will
do
this? no ad in boards has to be full on stealth. And yes it is for off
road use
as well, but still has to look factory fresh with no mods at all.
Dave Dahlgren


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list