[Diy_efi] EEC-V revisited..

[Justin Starkey @ VMP]

i hope you like staring at and editing hex hehe

you have more experience in this area than me, what if you used say the guieectuner
software or tweecer software to make the file? can they output stuff to a raw hex file
that could be flashed onto the eec via the NGS?

also, are all 96+ flashable through the obd port or just 97 or 98+ when i think the epa
started to require it

Justin Starkey
www.VelocityMustangPerformance.com
**Quote Original E-Mail In Reply**
----- Original Message -----
From: "Raymond Brantley" <raymond at iwantperformance.net>
To: "'List for general do-it-yourself EFI talk'" <diy_efi at diy-efi.org>
Sent: Tuesday, March 18, 2003 10:08 PM
Subject: RE: [Diy_efi] EEC-V revisited..


> Justin, on the NGS you can load a HEX file from a CD into one of the
> flash cards then flash the PCM. If one could hack that HEX file and put
> in their mods then put it back into the format the NGS understands you'd
> be set. The PCM flash capability is around a 1000.00 option to the NGS.
>
> Check out
> http://www.ntxtools.com/Merchant/merchant.mvc?Screen=PROD&Store_Code=01&
> Product_Code=HIK-81010
>
>
>
>
> Thanks,
> Raymond
> www.iwantperformance.net
>
>
>
> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
> On Behalf Of Justin Starkey @ VMP
> Sent: Tuesday, March 18, 2003 8:53 PM
> To: List for general do-it-yourself EFI talk
> Subject: Re: [Diy_efi] EEC-V revisited..
>
>
> I've only seen one once, but I didn't think it had any external
> input/output capability? Justin Starkey
> www.VelocityMustangPerformance.com
> **Quote Original E-Mail In Reply**
>
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi
>


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi