[Diy_efi] timeframe to get equal fuel distribution

[Mike]

Mabe we misunderstood where you were placing these,

so they wont leak the 400 - 600 odd psi pulse during combustion
they'd likely get exposed to past their '' ring supports,
held in by fuel rail only - no clamp ???

rdgs

mike


At 12:07 AM 3/16/03 -0700, you wrote:
>These injectors have been designed for this application. They will not melt. 
>They will not have to endure high pressures at all. 2 stroke pressure is 
>entirely different from 4 stroke. If the injectors are placed correctly,
they 
>can easilly be held in by the fuel rail only
>
>We have looked extensively into all the DI systems, more than the average 
>person has access to. With our budjet, none are feasable to be adapted to 
>other engines.
>
>This will work and has been done before, I just wanted some creative input
>
>Joel Day
>C.S.C 2003 Project Coordinator
>ph: 434 9294
>C.S.C Team Website: www.ualberta.ca/~uacsc
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi