[Diy_efi] question for the masses

[John Stricker]

Just curious,

Why not use the MPFI from the Fiero with the Fiero Ignition and '85 ECM that
supports a knock sensor?  It's a common, well hacked ECM (or so I
understand) and pretty low profile.

John Stricker
----- Original Message ----- 
From: "clayton "oddcomp"" <oddcomp at adelphia.net>
To: <diy_efi at diy-efi.org>
Sent: Wednesday, May 28, 2003 9:08 AM
Subject: [Diy_efi] question for the masses


> i am trying to  make a  one off  injection setup for a small kit car
since
> a tbi setup is too tall and using a mpfi setup from the same engine he
would
> have ignition problems
>
> my idea was to  use a carb intake <2.8 litre chevy v6> since they are
fairly
> low profile
> make a plenum to bolt onto it  with a progressive throttle body mounted on
> the front side of the plenum <like a tiny tpi >
> and about 4 injectors 2 on each side firing into the plenum behind the
> throttle body  aside from maybe fuel puddling when its cold or too much
fuel
> from improper tune
> anyone see a problem with this setup?
>
>
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi