[Diy_efi] question for the masses

[steve ravet]

> > my idea was to  use a carb intake <2.8 litre chevy v6> since they are
> fairly
> > low profile
> > make a plenum to bolt onto it  with a progressive throttle body mounted on
> > the front side of the plenum <like a tiny tpi >
> > and about 4 injectors 2 on each side firing into the plenum behind the
> > throttle body  aside from maybe fuel puddling when its cold or too much
> fuel
> > from improper tune
> > anyone see a problem with this setup?

You've got the wet manifold drawback of TBI with this setup, without the
benefit of the good atomization as the fuel passes the throttle plate. 
What is the ignition problem with the MPFI setup?

--steve


-- 
Steve Ravet
steve.ravet at arm.com
ARM,Inc.
www.arm.com

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi