[Diy_efi] Hi and JECS injector question

[J Creech]

Look at some late-80s Toyotas. Both Salvage and aftermarket. DSMs also have a resistor pack. Sorry I
can't be more specific. "Premade" packs are out there, you just have to dig a bit. Cheapest/easiest
will likely be a salvage yard.

-Scott C.

----- Original Message ----- 
From: "Lorcan Parnell" <lorcan at 750turbo.com>
To: "A list for Do-It-Yourself EFI" <diy_efi at diy-efi.org>
Sent: Wednesday, April 28, 2004 6:09 PM
Subject: Re: [Diy_efi] Hi and JECS injector question


> Thanks Brian, I have already spoken to RC and have the option of new
> injectors but was really looking for a cheaper solution. What do I need to
> make a "resistor box"? Is there a read-made one available for this job or a
> wiring diagram somewhere with the components listed?
>
> Lorcan
>
>
> ----- Original Message ----- 
> From: "Brian McMahan" <BMcMahan at superchips.com>
> To: "Lorcan Parnell" <lorcan at 750turbo.com>; "A list for Do-It-Yourself EFI"
> <diy_efi at diy-efi.org>
> Sent: Tuesday, April 27, 2004 8:52 PM
> Subject: RE: [Diy_efi] Hi and JECS injector question
>
>
> You can use a resistor box in the circuit and that will solve the PCM
> problem or you can refer to rcengineering for some custom injectors.
>
> Brian Mcmahan
>
>
>
>
>
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi