[Diy_efi] Re: Plumbing - EFI conversion

[Steve Ravet]

> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org=20
> [mailto:diy_efi-bounces at diy-efi.org] On Behalf Of Chris Carson
> Sent: Saturday, January 31, 2004 11:03 PM
> To: A list for Do-It-Yourself EFI
> Subject: Re: [Diy_efi] Re: Plumbing - EFI conversion
>=20
> Well, I'm going to be doing this on an 87 Cutlass, so the=20
> filler neck probably won't work with the Monte tank, meaning=20
> cutting it off and using a piece of rubber and worm clamps=20
> with a Cutlass neck??? (No way in Hell am I going to attempt=20
> to weld on a fuel tank...) Well, you're lucky, they want $100=20
> for a Monte tank at the local junkyard...the only one I was=20
> able to find a Monte EFI tank in! Without sending unit, $60.=20
> What's the part number for that sending unit? I may get that=20

Forgot to reply to this.  The part number for the 4.3L TBI gas tank =
sender is 25004938.  It doesn't include a pump.  It was $130 shipped.  =
yikes!  If you can get the tank with a good sender for $100 I wouldn't =
spend much time thinking about it.

--steve


_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi