[Diy_efi] Injector flow rate

[Robert W Hughes]

this seems to work:
New BPW = Old BPW * (New Engine Displacement/Old Engine
Displacement)/(New Injector Flow/Old Injector Flow)

> My thought is I'll change the constant to 178, not change the VE tables or 
> anything else and collect some data. The formula clearly shows the smaller 
> engine with the same injectors should have a smaller constant; not bigger. Just 
> calculating the change in the parameter based on the ratio of engine size gives 
> me the 178 value, too (as it better if I'm doing the math right!).
> 
> Thanks again.


-- 
Robert W. Hughes (Bob)
BackYard Engineering
29:40.237N, 95:28.726W or perhaps 30:55.265N, 95:20.590W
Houston, Texas "The city with too much Oxygen"
rwhughe at oplink.net


_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi