[Diy_efi] going sequentail on a 2-stroke?

[bcroe at juno.com]

Inductors (injectors) have a tendency to "ring" when 
turned off.  Putting in diodes might interfere with the 
ring damping effect of the driver, since the diode 
only conducts one way.  

Just using 2 injectors would solve most problems.  If 
retaining only one, I'd try to OR the control signals and 
feed them into a single driver.

Bruce Roe

26 Jan 04 "Peter Jonasson" <jonasso at mcmaster.ca> writes:

> I am not sure if joining the two injector pulses together is a 
> "good thing".   If it isn't, you could put two heavy duty steering 
> diodes, one in series with each injector, to isolate the injector 
> pulses from the ECU. 
_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi