[Diy_efi] going sequentail on a 2-stroke?

[joeld]

There is no room for two injectors, otherwise that is what I would do. I can 
attach a picture if thats allowed?

Joel

>===== Original Message From A list for Do-It-Yourself EFI 
<diy_efi at diy-efi.org> =====
>Inductors (injectors) have a tendency to "ring" when
>turned off.  Putting in diodes might interfere with the
>ring damping effect of the driver, since the diode
>only conducts one way.
>
>Just using 2 injectors would solve most problems.  If
>retaining only one, I'd try to OR the control signals and
>feed them into a single driver.
>
>Bruce Roe
>
>26 Jan 04 "Peter Jonasson" <jonasso at mcmaster.ca> writes:
>
>> I am not sure if joining the two injector pulses together is a
>> "good thing".   If it isn't, you could put two heavy duty steering
>> diodes, one in series with each injector, to isolate the injector
>> pulses from the ECU.
>_______________________________________________
>diy_efi mailing list
>diy_efi at diy-efi.org
>http://lists.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi