[Diy_efi] Reply to Mark Bacon's ground question

[Mark Bacon]

Marcello,
Thanks for that reply. I do not have a tach filter, and will check into
that. I really appreciate your input. Could be the very thing that is
missing.

Thanks

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of mbelloli at speedymotorsports.com
Sent: Thursday, June 10, 2004 3:32 AM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] Reply to Mark Bacon's ground question


Mark Bacon wrote:
>Can anyone tell me if the 727 ECM requires a chassis ground, and where the
>ecm gets the tach/rpm signal on the small/remote coil dist? I think my
>noise
>problem may be related.

>Thanks Mark

Mark I think I have your answer.  Do you have a tach filter???  Here is a
site with a pic of one.  Gm used these throughout the years.  And they've
cause me many problems over the years.  People remove them while doing
engine work and forget to reinstall them.  Then one day they finally
decide to bring there car in because it is running strangely.  If you look
at the tach signal with a DSO you'd see the problem.  Many of the eariler
carbureted computer cars had them in the line to the ecm, and not just the
tach.
  http://my.execpc.com/C4/4A/rodney1/corvette/

Marcello <hexibot43 at hotmail.com>
_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi