[Diy_efi] HALF SHAFTS (CV) AXLES

[James Dowell]

This is the reason that you ALWAYS grease the spline before you put this
assembly together.  Doesn't take much rust to freeze everything together.



----- Original Message ----- 
From: "Scott Pearson" <mrcad472 at iowatelecom.net>
To: "A list for Do-It-Yourself EFI" <diy_efi at diy-efi.org>
Sent: Tuesday, March 30, 2004 8:15 PM
Subject: Re: [Diy_efi] HALF SHAFTS (CV) AXLES


> First, this is the wrong list for this kind of question.
>
> Typically, the air hammer method will do the trick. If you can do it
without
> damaging anything, have someone put a prybar on the back side and try to
> move it while hitting it with the air hammer. Also, be sure you've got a
> strong air hammer. A Harbor Freight unit won't cut it. If that doesn't
work,
> sounds like the press is the way to go.
>
> Scott
>
> ----- Original Message ----- 
> From: "RAYMOND CROSBY" <rlcrosby34 at hotmail.com>
> To: <diy_efi at diy-efi.org>
> Sent: Monday, March 29, 2004 10:34 PM
> Subject: [Diy_efi] HALF SHAFTS (CV) AXLES
>
>
> > DIFFICULTY IN REMOVING THE SPLINED HUB END ON A 1995 FORD PROBE GT.
> DEALER
> > SAID A HUB PULLER IN REVERSE (PUSHING WITH THE CENTER BOLT)  OR AN AIR
> > CHISLE WITH A POINTED BIT NIETHER WORKED NOR DID THE TORCH!   ANY
HISTORY
> OR
> > ANY IDEAS OTHER THAN REMOVING ABS SENSOR AND UPPER SPINDLE TO STRUT
BOLTS
> > AND PULLING ENTIRE HUB WITH AXLE THEN USING A PRESS?
> >
> > _________________________________________________________________
> > Get reliable access on MSN 9 Dial-up. 3 months for the price of 1!
> > (Limited-time offer)
> >
>
http://join.msn.com/?page=dept/dialup&pgmarket=en-us&ST=1/go/onm00200361ave/direct/01/
> >
> > _______________________________________________
> > diy_efi mailing list
> > diy_efi at diy-efi.org
> > http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
>
>
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>


_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi