[Diy_efi] Sequential on a 2-stroke

[mark.linder at cox.net]

Also check out Megasquirt.  www.msefi.com or http://www.megasquirt.info/index.html

Mark

> 
> From: "Gianmarco Rizzo (BE/EAS)" <gianmarco.rizzo at ericsson.com>
> Date: 2004/11/10 Wed AM 05:08:01 EST
> To: "'A list for Do-It-Yourself EFI'" <diy_efi at diy-efi.org>
> Subject: RE: [Diy_efi] Sequential on a 2-stroke
> 
> you can alternatively check if this can be used
> 
> http://www.jefferies-au.org/My16M/
> 
> or contact Cliff, he might mod the firmware to suit a 2 stroker.
> 
> gm
> 
> 
> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
> Behalf Of joeld
> Sent: Dienstag, 9. November 2004 16:41
> To: diy_efi at diy-efi.org
> Subject: [Diy_efi] Sequential on a 2-stroke
> 
> 
> Hello all,
> 
> I've got a project going where I need to sequentially inject a snowmobile 
> engine. The motor is a twin, so each cylinder is 180 out from the other. 
> Anyhow, I would like to inject fuel at 100 btdc on both cylinders. Who makes a 
> controller that can do this?
> 
> Thanks,
> 
> Joel
> 
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> 

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi