[Diy_efi] RE: diy_efi Digest, Vol 13, Issue 7

ck c.kahler at verizon.net
Sat Oct 9 19:27:29 GMT 2004 

Mike,

What bin to you have?

I have access to AKAL,AMUR, ANLW, ANLZ and ASDZ Bins but didn't know which
one was best for my car.

I would be interested in something someone developed for their car that
works better than any of the stock bins.

Regards, Chuck


-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of diy_efi-request at diy-efi.org
Sent: Saturday, October 09, 2004 10:00 AM
To: diy_efi at diy-efi.org
Subject: diy_efi Digest, Vol 13, Issue 7


Send diy_efi mailing list submissions to
	diy_efi at diy-efi.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.diy-efi.org/mailman/listinfo/diy_efi
or, via email, send a message with subject or body 'help' to
	diy_efi-request at diy-efi.org

You can reach the person managing the list at
	diy_efi-owner at diy-efi.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of diy_efi digest..."


Today's Topics:

   1. RE: 1227747 ecm question (Fehn, Ron G)
   2. 1227747 ecm question (ck)
   3. Re: 1227747 ecm question (Mike V)
   4. Re: check VSS (Dave Williams)
   5. Re: check VSS (Jim Butterfield)


----------------------------------------------------------------------

Message: 1
Date: Fri, 8 Oct 2004 14:01:05 -0500
From: "Fehn, Ron G" <RFEHN at amfam.com>
Subject: RE: [Diy_efi] 1227747 ecm question
To: "A list for Do-It-Yourself EFI" <diy_efi at diy-efi.org>
Message-ID:

<FF774F51FA4E0D40A959FE453739DCD7016C845D at NHQ1ACCOEX03VS1.corporate.amfam.co
m>

Content-Type: text/plain; charset="us-ascii"

i have same but a 4+3.  the chip to use is the one that has an auto
trans and is close on weight.  i used the "starter bin" on crossfire
forum.  that will just get you in "ballpark"  plan on doing some re
burns after datalogging..
-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
On Behalf Of ck
Sent: Friday, October 08, 2004 11:43 AM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] 1227747 ecm question


 I'm  getting ready to burn a prom for my 747 ECM. The engine is a 5.7L
cross fire TBI with 700R4 tranny. The car weight is around 2500 lbs.


	I found the following bins for this engine trans combination. I
was wondering which one would be best for my installation. I would like
the best performance.

	AKAL
	AMUR
	ANLW
	ANLZ
	ASDZ

	Your recommendation would be very much appriciated.

	Regards,
	Chuck

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.woodcrestmen.org/pipermail/diy_efi/attachments/20041008/3ff892e
6/attachment-0001.htm

------------------------------

Message: 2
Date: Fri, 8 Oct 2004 19:31:49 -0700
From: "ck" <c.kahler at verizon.net>
Subject: [Diy_efi] 1227747 ecm question
To: <diy_efi at diy-efi.org>
Message-ID: <OKEOKAEPPELOBMDGCOEFEEMKCPAA.c.kahler at verizon.net>
Content-Type: text/plain; charset="iso-8859-1"

How do I go about getting "the "starter bin" on crossfire
forum".
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.woodcrestmen.org/pipermail/diy_efi/attachments/20041008/40d2197
b/attachment-0001.htm

------------------------------

Message: 3
Date: Fri, 08 Oct 2004 22:54:50 -0400
From: Mike V <diyefi at enzoco.com>
Subject: Re: [Diy_efi] 1227747 ecm question
To: A list for Do-It-Yourself EFI <diy_efi at diy-efi.org>
Message-ID: <5.1.0.14.0.20041008225324.00bc0d10 at enzoco.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 07:31 PM 10/8/2004 -0700, you wrote:
>How do I go about getting "the "starter bin" on crossfire
>forum".

not sure about that specific bin, but I can send you
an example of a crossfire bin if that helps.
Cheers,
Mike V


------------------------------

Message: 4
Date: Sat, 09 Oct 2004 06:06:30 -0500
From: Dave Williams <ronin at aristotle.net>
Subject: Re: [Diy_efi] check VSS
To: A list for Do-It-Yourself EFI <diy_efi at diy-efi.org>
Message-ID: <4167C636.9070109 at aristotle.net>
Content-Type: text/plain; charset=us-ascii; format=flowed

Jim Butterfield wrote:
> Yes you are kind of correct... the VSS is just like the sensor in the
wheels of cars with antilock breaks... it passes in front of a tone ring
that generates a block wave signal and the freq changes as the speed
increasese

  So, if I turn it by hand, I should see the needle on the volt meter
quiver?

--
===ronin at aristotle.net (Dave Williams)===================DoD #978===
== waiting, anticipating / for someone to save her soul / well, I ==
== ain't no new Messiah / but I'm close enough for rock and roll! ==
========================== http://www.bacomatic.org/~dw/index.htm ==


------------------------------

Message: 5
Date: Sat, 9 Oct 2004 07:22:30 -0700 (PDT)
From: Jim Butterfield <jimbutterfield at yahoo.com>
Subject: Re: [Diy_efi] check VSS
To: ronin at aristotle.net, A list for Do-It-Yourself EFI
	<diy_efi at diy-efi.org>
Message-ID: <20041009142230.64584.qmail at web52703.mail.yahoo.com>
Content-Type: text/plain; charset="us-ascii"

Yea youshould see a variable moviement, but easier is get a DVMM and chech
ohms when you rotate the wheel...

jim

Dave Williams <ronin at aristotle.net> wrote:
Jim Butterfield wrote:
> Yes you are kind of correct... the VSS is just like the sensor in the
wheels of cars with antilock breaks... it passes in front of a tone ring
that generates a block wave signal and the freq changes as the speed
increasese

So, if I turn it by hand, I should see the needle on the volt meter
quiver?

--
===ronin at aristotle.net (Dave Williams)===================DoD #978===
== waiting, anticipating / for someone to save her soul / well, I ==
== ain't no new Messiah / but I'm close enough for rock and roll! ==
========================== http://www.bacomatic.org/~dw/index.htm ==

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi


---------------------------------
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.woodcrestmen.org/pipermail/diy_efi/attachments/20041009/cf5988a
f/attachment-0001.htm

------------------------------

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi


End of diy_efi Digest, Vol 13, Issue 7
**************************************


_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi

More information about the Diy_efi mailing list