[Diy_efi] RE: ESC module connector

[RogeranCarol]

Blank I believe '92-'95 Chevrolet 5.7L trucks with manual trans, which use 
a C3 type ECM
 have an ESC module mounted on the passenger side of the engine. The same 
years with an auto
 trans use a P4 type PCM and have the ESC function internal to the 
computer, with only a single
 lead going to the knock sensor.
 I couldn't find a source for the connector, so acquired one from a wrecked 
truck.
Roger

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 145 bytes
Desc: not available
Url : http://lists.diy-efi.org/pipermail/diy_efi/attachments/20050405/b38fadf8/attachment.gif