April 2005 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Apr 1 00:50:11 UTC 2005
Ending: Fri Apr 29 23:10:53 UTC 2005
Messages: 310

• [Diy_efi] Propane FI   Justin Albury
• [Diy_efi] Propane FI   Justin Albury
• [Diy_efi] LPG Injection - Tonight on ABC @ 8:30   Justin Albury
• [Diy_efi] LPG Injection - Tonight on ABC @ 8:30   Justin Albury
• [Diy_efi] LPG Injection - Bit torrent to share it   Justin Albury
• [Diy_efi] 3s-gte external eeprom board ?   Andy
• [Diy_efi] Air fuel meters   Gianmarco Rizzo BE/EAS
• [Diy_efi] Air fuel meters   Gianmarco Rizzo BE/EAS
• [Diy_efi] was - Air fuel meters - now turbos and such   Gianmarco Rizzo BE/EAS
• [Diy_efi] Air fuel meters - slighlty OT from some time now   Gianmarco Rizzo BE/EAS
• [Diy_efi] Air fuel meters   Gianmarco Rizzo BE/EAS
• [Diy_efi] fast-ish 6 channel data logger   Gianmarco Rizzo BE/EAS
• [Diy_efi] fast-ish 6 channel data logger   Gianmarco Rizzo BE/EAS
• [Diy_efi] fast-ish 6 channel data logger   Gianmarco Rizzo BE/EAS
• [Diy_efi] fast-ish 6 channel data logger   Gianmarco Rizzo BE/EAS
• [Diy_efi] fast-ish 6 channel data logger   Gianmarco Rizzo BE/EAS
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   Gianmarco Rizzo BE/EAS
• [Diy_efi] Magesquirt vs D- jetronic   Gianmarco Rizzo BE/EAS
• [Diy_efi] Exhaust manifold pressure sensors   Gianmarco Rizzo BE/EAS
• [Diy_efi] American Hero   Randy Bailey
• [Diy_efi] Strain gauge on engine mounts   Randy Bailey
• [Diy_efi] Strain gauge on engine mounts   Randy Bailey
• [Diy_efi] EFI conversion   Randy Bailey
• [Diy_efi] HiWay Mode Question   Vic Belanger
• [Diy_efi] motronic editor   Odd Erik Bjørlo
• [Diy_efi] motronic editor   Odd Erik Bjørlo
• [Diy_efi] false myths   Ernest Buckler
• [Diy_efi] Reset ECM after replacing airbag?   Ernest Buckler
• [Diy_efi] Reset ECM after replacing airbag? My duh, thanks.   Ernest Buckler
• [Diy_efi] Reset ECM after replacing airbag? My duh, thanks.   Ernest Buckler
• [Diy_efi] Cassandra's relatives: ECU & waste-gate   Ernest Buckler
• [Diy_efi] American Hero   Ernest Buckler
• [Diy_efi] American Hero B.S.   Ernest Buckler
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   Ernest Buckler
• [Diy_efi] Air fuel meters   Jim Butterfield
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   Jim Butterfield
• [Diy_efi] GM LT4 knock module   Jim Butterfield
• [Diy_efi] do not mail to me anymoer!   Jim Butterfield
• [Diy_efi] Air fuel meters   CobraMan
• [Diy_efi] Air fuel meters   CobraMan
• [Diy_efi] Reset ECM after replacing airbag?   David Cooley
• [Diy_efi] Reset ECM after replacing airbag?   David Cooley
• [Diy_efi] Reset ECM after replacing airbag?   David Cooley
• [Diy_efi] Reset ECM after replacing airbag?   David Cooley
• [Diy_efi] Reset ECM after replacing airbag?   David Cooley
• [Diy_efi] Reset ECM after replacing airbag?   David Cooley
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   David Cooley
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   David Cooley
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   David Cooley
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   Donovan, Larry
• [Diy_efi] HiWay Mode Question   David Dowell
• [Diy_efi] Propane FI   David Dowell
• [Diy_efi] Propane FI   David Dowell
• [Diy_efi] American Hero   Bobby Yates Emory
• [Diy_efi] American Hero   Bobby Yates Emory
• [Diy_efi] Air fuel meters   Bobby Yates Emory
• [Diy_efi] Strain gauge on engine mounts   Bobby Yates Emory
• [Diy_efi] Magesquirt vs D- jetronic   Bobby Yates Emory
• [Diy_efi] GM HEI Coil   Torbjörn Forsman
• [Diy_efi] Bosch LH Jetronic v2.2   Torbjörn Forsman
• [Diy_efi] American Hero   Mike Frels
• [Diy_efi] American Hero   Mike Frels
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   Mike Frels
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   Mike Frels
• [Diy_efi] false myths   Murray Gill
• [Diy_efi] Nissan ECU?   Jason Grady
• [Diy_efi] Nissan Sentra Spec-V EFI mods   Jason Grady
• [Diy_efi] Magesquirt vs D- jetronic   Keith Grider
• [Diy_efi] Magesquirt vs D- jetronic   Keith Grider
• [Diy_efi] Re: Burning Aluminium etc.   John Gross
• Fwd: [Diy_efi] Re: Burning Aluminum etc.   John Gross
• [Diy_efi] Exhaust manifold pressure sensors   John Gross
• [Diy_efi] Peak EGTs occur at the stoichiometric ideal AFR of14.65-70:1   Stefan Hamminga
• [Diy_efi] Lean Cruise   Geoff Harrison
• [Diy_efi] American Hero   Greg Hermann
• [Diy_efi] American Hero__HEY MODERATOR?   Greg Hermann
• [Diy_efi] American Hero__HEY MODERATOR?   Greg Hermann
• [Diy_efi] American Hero   Greg Hermann
• [Diy_efi] Exhaust manifold pressure sensors   Greg Hermann
• [Diy_efi] Exhaust manifold pressure sensors   Greg Hermann
• [Diy_efi] Exhaust manifold pressure sensors   Greg Hermann
• [Diy_efi] Strain gauge on engine mounts   Rod Hiorns
• [Diy_efi] Strain gauge on engine mounts   Rod Hiorns
• [Diy_efi] Reset ECM after replacing airbag? My duh,   Robert W Hughes
• [Diy_efi]Fairlane, was Air fuel meters   Robert W Hughes
• [Diy_efi] Re: American Hero   Phil Hunter
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   J
• [Diy_efi] Exhaust manifold pressure sensors   J
• [Diy_efi] Rotary hall effect SYNC sensor   J
• [Diy_efi] Strain gauge on engine mounts   Milosz Kardasinski
• [Diy_efi] Strain gauge on engine mounts   Milosz Kardasinski
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   Milosz Kardasinski
• [Diy_efi] LPG Injection - Bit torrent to share it   Milosz Kardasinski
• [Diy_efi] Bosch 1600 cc injectors   Hugh Keir
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   Hugh Keir
• [Diy_efi] Reset ECM after replacing airbag?   Ken
• [Diy_efi] Reset ECM after replacing airbag?   Ken
• [Diy_efi] Reset ECM after replacing airbag?   Ken
• [Diy_efi] Re: Diy_efi Digest, Vol 2, Issue 32   Tim Kent
• [Diy_efi] motronic editor   Matt Kosonen
• [Diy_efi] ECM for 1990 Nissan 240   Phillip Kuhn
• [Diy_efi] Peak EGTs occur at the stoichiometric ideal AFR of 14.65-70:1   Phil Lamovie
• [Diy_efi] false myths   Phil Lamovie
• [Diy_efi] Re: Burning Aluminium etc.   Phil Lamovie
• [Diy_efi] Lean Cruise   Bret Levandowski
• [Diy_efi] American Hero   Logan Lingle
• [Diy_efi] American Hero__HEY MODERATOR?   Logan Lingle
• [Diy_efi] American Hero   Logan Lingle
• [Diy_efi] Strain gauge on engine mounts   Logan Lingle
• [Diy_efi] Strain gauge on engine mounts   Logan Lingle
• [Diy_efi] Capture advice   Tim Marsteiner
• [Diy_efi] Exhaust gas temp   Chris McKinnon
• [Diy_efi] Propane FI   Chris McKinnon
• [Diy_efi] Exhaust gas temp   Brian McMahan
• [Diy_efi] Tuning Ignition Advance...   Brian McMahan
• [Diy_efi] Reset ECM after replacing airbag?   Brian McMahan
• [Diy_efi] Reset ECM after replacing airbag?   Bobby Morgan
• [Diy_efi] Magesquirt vs D- jetronic   John Nevius
• [Diy_efi] Magesquirt vs D- jetronic   John Nevius
• [Diy_efi] Re: Burning Aluminum etc.   Daniel R. Nicoson
• [Diy_efi] Strain gauge on engine mounts   Daniel R. Nicoson
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   Daniel R. Nicoson
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   Daniel R. Nicoson
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   Daniel R. Nicoson
• [Diy_efi] measurement of tailshaft Twist   Daniel R. Nicoson
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   Daniel R. Nicoson
• [Diy_efi] Reset ECM after replacing airbag?   Wop OnTour
• [Diy_efi] Reset ECM after replacing airbag? My duh, thanks.   Wop OnTour
• [Diy_efi] Propane FI   Steve - Natural Pantry
• [Diy_efi] Ford 2.0 Injectors flow rate ?   Parladère Pascal
• [Diy_efi] Reset ECM after replacing airbag?   Scott Pearson
• [Diy_efi] RE: Reset ECM after replacing airbag? (Ken)   Ben & Cecilia Pena
• [Diy_efi] HiWay Mode Question   Jim Powell
• [Diy_efi] Reset ECM after replacing airbag?   Mike Pribyl
• [Diy_efi] ESC module connector   Rausch, Bernd
• AW: [Diy_efi] ESC module connector   Rausch, Bernd
• AW: [Diy_efi] ESC module connector   Rausch, Bernd
• AW: [Diy_efi] Renault v6   Rausch, Bernd
• [Diy_efi] GM LT4 knock module   Rausch, Bernd
• [Diy_efi] GM LT4 knock module   Rausch, Bernd
• [Diy_efi] American Hero__HEY MODERATOR?   Steve Ravet
• [Diy_efi] test   Steve Ravet
• [Diy_efi] ECM for 1990 Nissan 240   Steve Ravet
• [Diy_efi] Cheap EGT   Marc Reviel
• [Diy_efi] American Hero__HEY MODERATOR?   Marc Reviel
• [Diy_efi] motronic editor   Marc Reviel
• [Diy_efi] Strain gauge on engine mounts   Marc Reviel
• [Diy_efi] Strain gauge on engine mounts   Marc Reviel
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   Marc Reviel
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   Marc Reviel
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   Marc Reviel
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   Marc Reviel
• [Diy_efi] false myths   Michael Richards
• [Diy_efi] Exhaust gas temp   Michael Richards
• [Diy_efi] false myths   Michael Richards
• [Diy_efi] Tuning Ignition Advance...   Michael Richards
• [Diy_efi] Tuning Ignition Advance...   Michael Richards
• [Diy_efi] Tuning Ignition Advance...   Michael Richards
• [Diy_efi] American Hero   Michael Richards
• [Diy_efi] Air fuel meters   Michael Richards
• [Diy_efi] Re: Fairlane   Michael Richards
• [Diy_efi] RE: ESC module connector   RogeranCarol
• [Diy_efi] Rotary hall effect SYNC sensor   T S
• [Diy_efi] Rotary hall effect SYNC sensor   T S
• [Diy_efi] Renault v6   Stephane.Vier at SARTORIUS.COM
• [Diy_efi] Renault v6   Stephane.Vier at SARTORIUS.COM
• [Diy_efi] ESC module connector   Tomas J. Sokorai Sch.
• [Diy_efi] Magesquirt vs D- jetronic   Tomas J. Sokorai Sch.
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   Tomas J. Sokorai Sch.
• MAFs, was Re: [Diy_efi] Magesquirt vs D- jetronic   Tomas J. Sokorai Sch.
• [Diy_efi] Air fuel meters   James Seabolt
• [Diy_efi] Air fuel meters   James Seabolt
• [Diy_efi] Air fuel meters   James Seabolt
• [Diy_efi] Air fuel meters   James Seabolt
• [Diy_efi] Propane FI   James Seabolt
• [Diy_efi] Air fuel meters   James Seabolt
• [Diy_efi] Air fuel meters   James Seabolt
• [Diy_efi] Air fuel meters   James Seabolt
• [Diy_efi] Cheap EGT   Bill Shaw
• [Diy_efi] fast-ish 6 channel data logger   Bill Shaw
• [Diy_efi] Exhaust manifold pressure sensors   Bill Shaw
• [Diy_efi] Rotary hall effect SYNC sensor   Jim Sloan
• [Diy_efi] Magesquirt vs D- jetronic   Tomlinson, Brandon B.
• [Diy_efi] Reset ECM after replacing airbag?   Tyler Townsley
• [Diy_efi] Exhaust manifold pressure sensors   Van Setten, Tim at ACSSD
• [Diy_efi] false myths   Adam Wade
• [Diy_efi] false myths   Adam Wade
• [Diy_efi] Bosch LH Jetronic v2.2   Adam Wade
• [Diy_efi] Bosch LH-Jetronic   Adam Wade
• [Diy_efi] false myths   Adam Wade
• [Diy_efi] false myths - quick correction   Adam Wade
• [Diy_efi] false myths   Adam Wade
• [Diy_efi] false myths   Adam Wade
• [Diy_efi] Air fuel meters   Adam Wade
• [Diy_efi] Cassandra's relatives: ECU & waste-gate   Adam Wade
• [Diy_efi] Responses from John Deakin (long!)   Adam Wade
• [Diy_efi] Responses from John Deakin (long!)   Adam Wade
• [Diy_efi] Re: Burning Aluminium etc.   Adam Wade
• Fwd: [Diy_efi] Re: Burning Aluminum etc.   Adam Wade
• Fwd: [Diy_efi] Re: Burning Aluminum etc.   Adam Wade
• [Diy_efi] fast-ish 6 channel data logger   Adam Wade
• [Diy_efi] Magesquirt vs D- jetronic   Adam Wade
• [Diy_efi] Magesquirt vs D- jetronic   Adam Wade
• [Diy_efi] Strain gauge on engine mounts   Bill Washington
• [Diy_efi] LPG injection   Bill Washington
• [Diy_efi] measurement of tailshaft Twist   Bill Washington
• [Diy_efi] American Hero   Bevan Weiss
• [Diy_efi] Exhaust manifold pressure sensors   Chris Wilson
• [Diy_efi] ESC module connector   WopOnTour
• [Diy_efi] ESC module connector   WopOnTour
• [Diy_efi] Reset ECM after replacing airbag?   WopOnTour
• [Diy_efi] motronic editor   WopOnTour
• [Diy_efi] Reset ECM after replacing airbag?   WopOnTour
• [Diy_efi] Reset ECM after replacing airbag?   WopOnTour
• [Diy_efi] chvey 4.3 tbi   WopOnTour
• [Diy_efi] RE: Reset ECM after replacing airbag? (Ken)   WopOnTour
• [Diy_efi] GM LT4 knock module   WopOnTour
• [Diy_efi] HiWay Mode Question   josephl at aei.ca
• [Diy_efi] HiWay Mode Question   dowelljd at alltel.net
• [Diy_efi] false myths   Djfreggens at aol.com
• [Diy_efi] false myths   WSCowell at aol.com
• [Diy_efi] Bosch LH Jetronic v2.2   WSCowell at aol.com
• [Diy_efi] Bosch LH-Jetronic   WSCowell at aol.com
• [Diy_efi] American Hero   b burns
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   chris
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   chris
• [Diy_efi] chvey 4.3 tbi   rtimmins at fone.net
• [Diy_efi] Reset ECM after replacing airbag?   frederic
• [Diy_efi] Reset ECM after replacing airbag? My duh, thanks.   frederic
• [Diy_efi] Strain gauge on engine mounts   frederic
• [Diy_efi] LPG Injection - Bit torrent to share it   frederic
• [Diy_efi] LPG Injection - Bit torrent to share it   frederic
• [Diy_efi] Strain gauge on engine mounts   frederic
• [Diy_efi] do not mail to me anymoer!   frederic
• [Diy_efi] false myths   gary
• [Diy_efi] false myths   gary
• [Diy_efi] false myths   gary
• [Diy_efi] false myths   gary
• [Diy_efi] false myths   gary
• [Diy_efi] false myths   gary
• [Diy_efi] Exhaust gas temp   gary
• [Diy_efi] Peak EGTs occur at the stoichiometric ideal AFR of14.65-70:1   gary
• [Diy_efi] Exhaust gas temp   gary
• [Diy_efi] false myths   gary
• [Diy_efi] false myths   gary
• [Diy_efi] American Hero   gary
• [Diy_efi] American Hero   gary
• [Diy_efi] Responses from John Deakin (long!)   gary
• [Diy_efi] Re: Burning Aluminium etc.   gary
• [Diy_efi] Re: Burning Aluminium etc.   gary
• Fwd: [Diy_efi] Re: Burning Aluminum etc.   gary
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   gary
• [Diy_efi] Tuning Ignition Advance...   TheEthereal at gmx.net
• [Diy_efi] [ot] Diahatsu Move 1995 - reading the ECU diagnostic codes ?   TheEthereal at gmx.net
• [Diy_efi] Re: Burning Aluminium etc.   niche at iinet.net.au
• [Diy_efi] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] Re: Burning Aluminium etc.   niche at iinet.net.au
• [Diy_efi] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] (no subject) - VL Commodore ECUs ???   niche at iinet.net.au
• [Diy_efi] (no subject) - VL Commodore ECUs ???   niche at iinet.net.au
• [Diy_efi] (no subject) - VL Commodore ECUs ???   niche at iinet.net.au
• [Diy_efi] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] fast-ish 6 channel data logger   niche at iinet.net.au
• [Diy_efi] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] EFI conversion   niche at iinet.net.au
• [Diy_efi] American Hero   niche at iinet.net.au
• [Diy_efi] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] fast-ish 6 channel data logger   niche at iinet.net.au
• [Diy_efi] EFI conversion   niche at iinet.net.au
• [Diy_efi] fast-ish 6 channel data logger   niche at iinet.net.au
• [Diy_efi] fast-ish 6 channel data logger   niche at iinet.net.au
• [Diy_efi] LPG Injection - Tonight on ABC @ 8:30   niche at iinet.net.au
• [Diy_efi] LPG Injection - Bit torrent to share it   niche at iinet.net.au
• [Diy_efi] LPG Injection - Bit torrent to share it   niche at iinet.net.au
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] RE: [offlist] Strain gauge on engine mounts   niche at iinet.net.au
• [Diy_efi] LPG Injection - Bit torrent to share it   niche at iinet.net.au
• [Diy_efi] [ot] Diahatsu Move 1995 - reading the ECU diagnostic codes ?   niche at iinet.net.au
• [Diy_efi] [ot] Diahatsu Move 1995 - reading the ECU diagnostic codes ?   niche at iinet.net.au
• [Diy_efi] Reset ECM after replacing airbag?   jb
• [Diy_efi] Reset ECM after replacing airbag?   jb
• [Diy_efi] Re: Burning Aluminium etc.   mark krawczuk
• [Diy_efi] (no subject)   mark krawczuk
• [Diy_efi] (no subject) - VL Commodore ECUs ???   mark krawczuk
• [Diy_efi] (no subject) - VL Commodore ECUs ???   mark krawczuk
• [Diy_efi] measurement of tailshaft Twist   mark krawczuk
• [Diy_efi] Exhaust gas temp   sc7500
• [Diy_efi] Exhaust gas temp   sc7500
• [Diy_efi] Exhaust gas temp   sc7500
• [Diy_efi] Exhaust gas temp   sc7500
• [Diy_efi] Exhaust gas temp   hugh at sol.co.uk
• [Diy_efi] Tuning Ignition Advance...   hugh at sol.co.uk
• [Diy_efi] Strain gauge on engine mounts   hugh at sol.co.uk
• [Diy_efi] Strain gauge on engine mounts   hugh at sol.co.uk
• [Diy_efi] Strain gauge on engine mounts   hugh at sol.co.uk
• [Diy_efi] Magesquirt vs D- jetronic   spati
• [Diy_efi] Re: Digest mode   mike sutton
• [Diy_efi] Re: Fairlane   brian.mackay at sympatico.ca
• [Diy_efi] Post 4-Wire O2 Sensor Swap Observations...   charles at taildragger.info
• [Diy_efi] 3s-gte external eeprom board ?   J voveris
• [Diy_efi] 3s-gte external eeprom board ?   J voveris
• [Diy_efi] Exhaust manifold pressure sensors   J voveris
• [Diy_efi] 3s-gte external eeprom board ?   J voveris
• [Diy_efi] American Hero   philo at wayfarer1.com
• [Diy_efi] do not mail to me anymoer!   林 皇儒

Last message date: Fri Apr 29 23:10:53 UTC 2005
Archived on: Fri Sep 4 00:30:44 UTC 2015

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...