[Diy_efi] RE: [offlist] Strain gauge on engine mounts

[Milosz Kardasinski]

> 
> >Any mech structural engineers here care to estimate degrees
> >of twist for say 100 newton metres of torque over length of say
> >650mm and 80mm dia... ?

  Assuming a tube wall thickness of 2.54mm I calculate 0.0956 degrees of 
twist.

Cheers,
M.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20050420/edda65d8/attachment.html