[Gmecm] Re: Datalogging '94-'95 LT1 computer

[Mark Mansur]

Since Dave was kind enough to bring it up, I should mention for completeness 
that TunerPro RT will work fine for ALDL monitoring/logging the 92/93 LT1s 
(DAx), but you may run into trouble with 94/95. This is because of the 
EE/EEB masks' message schedules spewing out unsolicited data (similar to 
$58). You must first send out the mode 8 silence command at the proper time 
to get the ECM to shut up before the software can connect.

I will be re-writing the ALDL engine within TunerPro over the next 2 or 3 
months to solve this and a few other issues, as well as add a bunch of other 
features (histograms, new logging functionality, etc).

Also, TunerPro RT is also free and registration is 100% optional. If you 
like it but feel you'd rather not spend the $30, then don't. Contrary to 
popular belief (or, to quote one at least), you don't always have to pay if 
you want to play! ;-)

While I have your ear (er, eyes), the next version of TunerPro will feature 
ALDL data tracing such that you can monitor where in a table (spark, fuel, 
etc) the car is actively running. The cells in the spark table, for 
instance, will be highlighted based off of the RPM and Load information 
being gathered via the ALDL. Look for that release in another couple of 
weeks (it currently works quite nicely with my $6E '165).

Let me know if (any of) you have anything else you'd like to see TunerPro 
do.

Mark
http://tunerpro.markmansur.com/

----- Original Message ----- 
From: "Dave Jones" <hotrodder at mindspring.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, August 18, 2005 1:19 PM
Subject: Re: [Gmecm] Re: Datalogging '94-'95 LT1 computer


> How about Freescan?   It might not be the best, but it's enough to get you 
> started, and the price is right.
> http://www.andywhittaker.com/ecu/ecu_software.htm
>
> If you decide to go with Datamaster, Andrew Mattei sells the license for 
> $95, which is below TTS's list price.
> http://www.akmcables.com/
>
> I haven't yet gotten around to trying the datalogging function of TunerPro 
> RT with the LT1, but it seems like it should work.  If you want to give 
> that a shot, you could try it for free.  If it works for you, RT is only 
> $30 to register.
> http://www.supportfitness.com/mark/tunerpro/
>
> HTH,
> Dave
>
>
>
>>> What's the best product for datalogging a '94-'95 LT1 computer? I've had
>>> TTS
>>> Datamaster recommended to me but it seems a bit expensive to someone
>>> coming
>>> from the realm of WinALDL and basically free/$30 software downloads for
>>> older PCM's. Is anything else out there very good? What else is out
>>> there?
>>>
>>>
>>> Will
>
>
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/gmecm
> 
_______________________________________________
Gmecm mailing list
Gmecm at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/gmecm