[Diy_efi] Toyota 2F - TBI Install

[Lee M. Lemoine]

Well, without a lot of information given, is the fuel pump turning on?
 Adequate fuel pressure @ the injectors?   How about vaccum leaks?

--LL

On 8/22/05, Facundo Lozano Ureta <flozano at twistedandes.com> wrote:
> =20
> Hello=20
>  =20
> This is my first post on this list.=20
> I have a Toyota Land Cruiser FJ60 with 2F engine. I'm installing a TBI
> system from 4.3 V6 GM TBI.=20
> at list i have installed an adapter plate, Fuel pump, GM HEI with 7 pin
> module, 1227747 ECM with reprogramed CHIP for 2F, O2, Water Temp.=20
> I don' have VSS for the moment.=20
> When I crank, the injectors start, and the engine start for about 5 secon=
ds
> and stop, some times for 30 seconds, but nothing more.=20
> anyone have an idea?=20
>  =20
> Thanks=20
> Facundo=20
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>=20
>=20
>=20


--=20
Sincerely,

Lee M. Lemoine
http://www.turbochargedsoul.com/
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi