[Diy_efi] Toyota 2F - TBI Install

[Facundo Lozano Ureta]

The pump stat for 2 seconds, wen the engine start the pump start again.
Vaccum leaks I will check

Tanks
----- Original Message ----- 
From: "Lee M. Lemoine" <llemoine at gmail.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, August 23, 2005 9:42 AM
Subject: Re: [Diy_efi] Toyota 2F - TBI Install


> Well, without a lot of information given, is the fuel pump turning on?
> Adequate fuel pressure @ the injectors?   How about vaccum leaks?
>
> --LL
>
> On 8/22/05, Facundo Lozano Ureta <flozano at twistedandes.com> wrote:
>>
>> Hello
>>
>> This is my first post on this list.
>> I have a Toyota Land Cruiser FJ60 with 2F engine. I'm installing a TBI
>> system from 4.3 V6 GM TBI.
>> at list i have installed an adapter plate, Fuel pump, GM HEI with 7 pin
>> module, 1227747 ECM with reprogramed CHIP for 2F, O2, Water Temp.
>> I don' have VSS for the moment.
>> When I crank, the injectors start, and the engine start for about 5 
>> seconds
>> and stop, some times for 30 seconds, but nothing more.
>> anyone have an idea?
>>
>> Thanks
>> Facundo
>> _______________________________________________
>> Diy_efi mailing list
>> Diy_efi at diy-efi.org
>> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>>
>>
>>
>
>
> -- 
> Sincerely,
>
> Lee M. Lemoine
> http://www.turbochargedsoul.com/
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> 


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi