[Diy_efi] 7727 deal.

[alladinsaane at verizon.net]

>hey dude....a 727 is the same ecu used in 90-91 vettes.....its called a weatherpak....is suposed to be pretty much heat and rain resistent....if you change the memcal to a v-8 one for a 80-91 vette or 91-92 tpi camero it should work....this is for a speed density set up and does not use the maf type setup....it runs off the map sensor...it also must have a 4000 ppm vss....chris in north jer z                                                               From: Joe Boucher <boucherj at prodigy.net>
>Date: Sun Aug 28 02:46:49 CDT 2005
>To: diy_efi at diy-efi.org
>Subject: [Diy_efi] 7727 deal.

>There's a pull-it-yourself junkyard near my home.  There is a Cutlass in the
>yard which has hand written markings on it claiming it is a 1991.
>
>The under the hood ECU is a 7727.  The wiring harness for the 3.1 V-6 is in
>the car and apparently not cut up  The junkyard wants $50 for the wiring
>harness and the computer.  I probably get away with the cheaper sensors such
>as the temp and map sensors, but not the mas or coil pack, which aren't
>there anyway.  This sounds like a deal to me.  I think the wiring harness
>alone is worth the cost.
>
>Can the V-6 ECU be changed to V-8 duty with cal-pack/prom chip change?
>
>The hood is off the car and the ECU exposed to rain.  It is supposed to be
>sealed for water and sun, isn't it?
>
>Thanks,
>
>Joe
>
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://lists.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi