[Diy_efi] Testing an inductance coil.

[WSCowell at aol.com]

Good grief... there is no suggestion the coil has shorts, and I DID advise  
use of an oscilloscope, by far the best test.  It would tell whether the  coil 
is doing its job as a CT.  Unless you have design info you won't know  the 
design inductance etc.
 
NB we are of course not talking about injectors here, nor ignition  coils.  
My advice was very sharply focused on the subject matter  presented...  It 
never hurts to address the question asked.  :-)
 
Will C
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20050817/5d669c69/attachment.html