[Diy_efi] Olds 403 MPFI Project

[Djfreggens at aol.com]

In a message dated 8/17/2005 7:32:02 P.M. Eastern Standard Time,  
EEOLAY5 at aol.com writes:

Hello I am Theo.
      I am attempting to MPFI a 1979 Olds 403  for my 1987 Buick LaSabre 
Estate Wagon. The finished project must support ALDL  scanning, 200R-4 Tranny 
Lockup and 49-State Emissions. The finished project  will be a daily driver for 
street use only. I would like to keep the project  all GM-AC Delco using Multec 
Injectors and related sensors. Will anyone with  related experience Please 
help me in getting this project started. The budget  is limited to building this 
thing reasonably. All comments are welcome. 
Thanks,
Theo.






get a 4 barrel intake add injector bungs/ use a 2bbl adapter plate  to a tbi  
get a 307(87-89) compu carb distributor and wire it up with a gm  controler. 
very simple project. can be accompliseh with almost all ac delco  parts. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20050817/cdbf3e6e/attachment.html