[Diy_efi] 730 ECM low ohm injector modifications?

[Mike V]

At 11:14 AM 8/18/2005 -0700, you wrote:

>I just took mine apart and compared it to the '749
>pictures I've found online.  The boards look identical
>and the holes for the 2nd injector driver are there.
>I wonder if you could solder that in and run 749 code
>with a '730 to get P&H ?

Just to be clear, a 7749 won't run 8 low impedance injectors
for too long before the magic ECM smoke is let out.
You can run four injectors okay.  Eight low Z injectors
will require a driver upgrade.
Cheers,
MV