[Diy_efi] RE: Injector Flow bench posting

Thu Feb 3 19:43:42 GMT 2005

Go to the diy_efi home page, click projects, then injector flow bench
locally hosted.  Schematic is in part 1.

--steve=20

> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org=20
> [mailto:diy_efi-bounces at diy-efi.org] On Behalf Of Bacon, David
> Sent: Thursday, February 03, 2005 1:36 PM
> To: diy_efi at diy-efi.org
> Subject: [Diy_efi] RE: Injector Flow bench posting
>=20
>=20
> Where is the Injector Flow Bench schematic posted?
>=20
> David
>=20
> Message: 1
> Date: Wed, 2 Feb 2005 20:56:16 -0600
> From: "Steve Ravet" <Steve.Ravet at arm.com>
> Subject: RE: [Diy_efi] Injector flow bench
> To: "A list for Do-It-Yourself EFI" <diy_efi at diy-efi.org>
> Message-ID:
> 	<B4A41761B8AB69439E1DD1F2A3275800A33BBE at NASDAQ.usa.Arm.com>
> Content-Type: text/plain;	charset=3D"us-ascii"
>=20
> sorry for the delay, my copies of the magazines were packed away.
>=20
> VR1 and VR2 are in the injector drive circuit, both are 100=20
> ohm 20W. VR3
> is in the fuel pump circuit, it's 20 ohm 20W
>=20
> put "clarostat rheostat" into google for some leads on where to get
> them.  Getting a higher wattage pot is OK, but not lower.
>=20
> --steve=20
>=20
> > -----Original Message-----
> > From: diy_efi-bounces at diy-efi.org
> > [mailto:diy_efi-bounces at diy-efi.org] On Behalf Of Mike Frels
> > Sent: Friday, January 28, 2005 8:16 PM
> > To: A list for Do-It-Yourself EFI
> > Subject: RE: [Diy_efi] Injector flow bench
> >=20
> > After blowing up the page with the schematic on it to 200% I
> > was able to=20
> > identify most of the components. The potentiometers I am=20
> > still not sure of.=20
> > The legibility is not legible. All three of them are=20
> > Clarostat or equiv.=20
> > Two of them look like 100ohm 20watt pieces and the single one=20
> > appears to be=20
> > 20ohm 20watt. Is this correct? I am having a hard time=20
> > finding anything=20
> > larger than 4 watts. I am a gearhead not a sparky so this=20
> is somewhat=20
> > foreign to me.
> >=20
> > Mike
> >=20
> > At 10:33 AM 1/24/2005, you wrote:
> > >Phil H sent me the article some time ago but I neglected to
> > repost it.
> > >It's there now, the one that says "(locally hosted)".  You
> > may need to
> > >refresh your browser window.
> > >
> > >--steve
> > >
> > > > -----Original Message-----
> > > > From: diy_efi-bounces at diy-efi.org=20
> > > > [mailto:diy_efi-bounces at diy-efi.org] On Behalf Of=20
> Curtis Richards
> > > > Sent: Monday, January 24, 2005 10:17 AM
> > > > To: diy_efi at diy-efi.org
> > > > Subject: [Diy_efi] Injector flow bench
> > > >
> > > > Hi All,
> > > >
> > > > Has anyone saved a copy of the project page about building an=20
> > > > injector flow bench.  The links are 404ed.
> > > >
> > > > Thanks
> > > > Curt
> > > >
> > > > --
> > > > CWR
> >=20
> > _______________________________________________
> > diy_efi mailing list
> > diy_efi at diy-efi.org=20
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >=20
> >=20
>=20
> ------------------------------
>=20
> Message: 2
> Date: Thu, 3 Feb 2005 17:42:22 +0530
> From: "S. K Rahman" <skrahman at gmail.com>
> Subject: [Diy_efi] air fuel meter gage
> To: A list for Do-It-Yourself EFI <diy_efi at diy-efi.org>
> Message-ID: <714f41aa05020304122705f174 at mail.gmail.com>
> Content-Type: text/plain; charset=3DUS-ASCII
>=20
> Hi Dan/list,
>=20
> Else where I while on the list I have red that you have build=20
> a Air Fuel
> meter gage. Can you please post the schematics of the same?
>=20
> Regards
>=20
> ------------------------------
>=20
> Message: 3
> Date: Thu, 3 Feb 2005 13:20:37 +0100=20
> From: "Gianmarco Rizzo (BE/EAS)" <gianmarco.rizzo at ericsson.com>
> Subject: [Diy_efi] ion sensing
> To: "'S. K Rahman'" <skrahman at gmail.com>,        "'A list for
> 	Do-It-Yourself EFI'"	 <diy_efi at diy-efi.org>
> Message-ID:
> =09
> <2574043332486841A5B27A5FE9769E45083A6186 at esealnt888.al.sw.eri
> csson.se>
> =09
> Content-Type: text/plain;	charset=3D"iso-8859-1"
>=20
>=20
> not strictly related but interesting nonetheless
>=20
> http://www.hut.fi/~vvartiov/ion/ion.html
>=20
> ------------------------------
>=20
> Message: 4
> Date: Thu, 3 Feb 2005 06:29:42 -0600 (GMT-06:00)
> From: Mike Frels <mfrels at ix.netcom.com>
> Subject: RE: [Diy_efi] Injector flow bench
> To: A list for Do-It-Yourself EFI <diy_efi at diy-efi.org>, 	Steve
> Ravet
> 	<Steve.Ravet at arm.com>
> Message-ID:
> =09
> <25993031.1107433782962.JavaMail.root at misspiggy.psp.pas.earthlink.net>
> Content-Type: text/plain; charset=3Dus-ascii
>=20
> I did some more Googing a couple of days ago. After much=20
> digging I found
> 25 Watt Rhestats in 100 ohm and 25 ohm sizes made by Vishay.=20
>=20
> Did you say "my copies of the magazine" as in you have an original of
> the issue it came from? It's taking me a little while to read=20
> the first
> article because of the low resolution and truncation at creases. Part
> two is fine. If you have an original do you suppose we could=20
> implore you
> to produce some better scans. I personally will be willing to=20
> finance a
> trip by you to K1NK0S, or other, to produce a *hard* copy of the
> article.
>=20
> Mike
>=20
> -----Original Message-----
> From: Steve Ravet <Steve.Ravet at arm.com>
> Sent: Feb 2, 2005 8:56 PM
> To: A list for Do-It-Yourself EFI <diy_efi at diy-efi.org>
> Subject: RE: [Diy_efi] Injector flow bench
>=20
> sorry for the delay, my copies of the magazines were packed away.
>=20
> VR1 and VR2 are in the injector drive circuit, both are 100=20
> ohm 20W. VR3
> is in the fuel pump circuit, it's 20 ohm 20W
>=20
> put "clarostat rheostat" into google for some leads on where to get
> them.  Getting a higher wattage pot is OK, but not lower.
>=20
> --steve=20
>=20
> > -----Original Message-----
> > From: diy_efi-bounces at diy-efi.org
> > [mailto:diy_efi-bounces at diy-efi.org] On Behalf Of Mike Frels
> > Sent: Friday, January 28, 2005 8:16 PM
> > To: A list for Do-It-Yourself EFI
> > Subject: RE: [Diy_efi] Injector flow bench
> >=20
> > After blowing up the page with the schematic on it to 200% I
> > was able to=20
> > identify most of the components. The potentiometers I am=20
> > still not sure of.=20
> > The legibility is not legible. All three of them are=20
> > Clarostat or equiv.=20
> > Two of them look like 100ohm 20watt pieces and the single one=20
> > appears to be=20
> > 20ohm 20watt. Is this correct? I am having a hard time=20
> > finding anything=20
> > larger than 4 watts. I am a gearhead not a sparky so this=20
> is somewhat=20
> > foreign to me.
> >=20
> > Mike
> >=20
> > At 10:33 AM 1/24/2005, you wrote:
> > >Phil H sent me the article some time ago but I neglected to
> > repost it.
> > >It's there now, the one that says "(locally hosted)".  You
> > may need to
> > >refresh your browser window.
> > >
> > >--steve
> > >
> > > > -----Original Message-----
> > > > From: diy_efi-bounces at diy-efi.org=20
> > > > [mailto:diy_efi-bounces at diy-efi.org] On Behalf Of=20
> Curtis Richards
> > > > Sent: Monday, January 24, 2005 10:17 AM
> > > > To: diy_efi at diy-efi.org
> > > > Subject: [Diy_efi] Injector flow bench
> > > >
> > > > Hi All,
> > > >
> > > > Has anyone saved a copy of the project page about building an=20
> > > > injector flow bench.  The links are 404ed.
> > > >
> > > > Thanks
> > > > Curt
> > > >
> > > > --
> > > > CWR
> >=20
>=20
>=20
> ------------------------------
>=20
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org http://lists.diy-efi.org/mailman/listinfo/diy_efi
>=20
>=20
> End of diy_efi Digest, Vol 17, Issue 3
> **************************************
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>=20
>=20
_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi