[Diy_efi] Smallblock Chevy - Jeep question

[Frank McCracken]

Plus, if you do the complete 305 with tbi there is no tuning issuses with
the prom.

----- Original Message -----
From: "Phillip Kuhn" <pmkls1 at yahoo.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, March 22, 2005 4:56 PM
Subject: Re: [Diy_efi] Smallblock Chevy - Jeep question


> If all you want is low end power and simplicity then I
> would go with a TBI setup out of the scrapyard. The
> TBI is the simplest, builds plenty of low end power
> and is going to be the most affordable. Im not sure if
> there are many TBI intakes that bolt up to a standard
> small block head, since most of them were produced
> after '87. Post '87 small block heads have the 4 inner
> bolts angled outward for easier access. If you decide
> to go that route then you may want to pick up a set of
> heads that go with the TBI intake. Honestly you may be
> better off picking up a complete TBI 305 since it will
> probably cost about the same as buying the efi setup
> and heads, and there are a lot more parts available
> for the 305 vs. a 307. You can always go with a TPI
> setup, but these days anyone who has one for sale
> wants a fortune for it. Hope this helps,
> Phil
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Sports - Sign up for Fantasy Baseball.
> http://baseball.fantasysports.yahoo.com/
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>