[Diy_efi] Re: Hack or ECU file for $51

[Andrew Hopton]

I have a modified bin for a VS with 3.8l eng/Auto trans.  Might be useful
for comparison ...  Can't remember if its a $51, as I lost my TunerPro
install in a recent glitch, so I can?t check the bin out easily.

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org] On
Behalf Of Justin Albury
Sent: Friday, 18 March 2005 6:00 PM
To: diy_efi at diy-efi.org
Subject: Re: [Diy_efi] Re: Hack or ECU file for $51

I have a Autoprom interface .....it works very well, but i havent come 
across a $51 file yet.  I am also looking for one to play with. Tunercat 
has no VS Commodore support ($51) ......I will be working on a ECU file 
over the next few weeks if i get time for a $51.....are you interested 
in working on this together?

Justin

Bret Levandowski wrote:

> I'm not sure about the def file, but I know that Craig Moates  
> www.moates.net <http://www.moates.net>  makes the Autoprom. It will 
> handle files up to 256k. It's what I've been using and it works great. 
> Reads, burns and emulates. C.A.T.S  www.tunercat.com 
> <http://www.tunercat.com> will most likely be able to help with the 
> def file. They do have the Holden 5D file and a very good disassembler 
> program. Because my 1227747 was converted to use a 27SF512 flash 
> memory, Craig had to disable the checksum to allow me to read/write. 
> Check with those two sites, that should get you what you need.  Ski
>
> */Simon Maddock <maddock.simon at gmail.com>/* wrote:
>
>     Hi all,
>
>     I am wanting to analyse the code in my 1996 Holden VS Commodore
>     (3.8ltr ecotec V6) with a 16199728 ECU running $51 code. I was after
>     a pre-done hack for this or even an ECU definition file if one exists.
>     I have been searching for months but have had no success. I have
>     even tried to disassemble the code myself, however the EPROM is a 128k
>     one, and nearly all freeware/shareware disassemblers only allow 64k
>     images.
>
>     If no one knows of any ECU definition file or hack file, does any one
>     know of a disassembler that would be capable of disassembling the 128k
>     image?
>
>     Thanks,
>     Simon
>     _______________________________________________
>     Diy_efi mailing list
>     Diy_efi at diy-efi.org
>     http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
> ------------------------------------------------------------------------
> Do you Yahoo!?
> Yahoo! Mail - Easier than ever with enhanced search. Learn more. 
> <http://us.rd.yahoo.com/evt=29916/*http://info.mail.yahoo.com/mail_250>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://lists.diy-efi.org/mailman/listinfo/diy_efi
>  
>


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.3 - Release Date: 15/03/2005

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi

-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.3 - Release Date: 15/03/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 18/03/2005