[Diy_efi] Re: Hack or ECU file for $51

[Justin Albury]

unless its a GMH LPG install it will be a $51 for a VS V6 Auto, well that ia as
long as its not a kalmaker file.   Shoot the file through and I will let you
know what you have..

Justin


Quoting Andrew Hopton <ahopton at optusnet.com.au>:

> I have a modified bin for a VS with 3.8l eng/Auto trans.  Might be useful
> for comparison ...  Can't remember if its a $51, as I lost my TunerPro
> install in a recent glitch, so I can?t check the bin out easily.
> 
> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org] On
> Behalf Of Justin Albury
> Sent: Friday, 18 March 2005 6:00 PM
> To: diy_efi at diy-efi.org
> Subject: Re: [Diy_efi] Re: Hack or ECU file for $51
> 
> I have a Autoprom interface .....it works very well, but i havent come 
> across a $51 file yet.  I am also looking for one to play with. Tunercat 
> has no VS Commodore support ($51) ......I will be working on a ECU file 
> over the next few weeks if i get time for a $51.....are you interested 
> in working on this together?
> 
> Justin
> 
> Bret Levandowski wrote:
> 
> > I'm not sure about the def file, but I know that Craig Moates  
> > www.moates.net <http://www.moates.net>  makes the Autoprom. It will 
> > handle files up to 256k. It's what I've been using and it works great. 
> > Reads, burns and emulates. C.A.T.S  www.tunercat.com 
> > <http://www.tunercat.com> will most likely be able to help with the 
> > def file. They do have the Holden 5D file and a very good disassembler 
> > program. Because my 1227747 was converted to use a 27SF512 flash 
> > memory, Craig had to disable the checksum to allow me to read/write. 
> > Check with those two sites, that should get you what you need.  Ski
> >
> > */Simon Maddock <maddock.simon at gmail.com>/* wrote:
> >
> >     Hi all,
> >
> >     I am wanting to analyse the code in my 1996 Holden VS Commodore
> >     (3.8ltr ecotec V6) with a 16199728 ECU running $51 code. I was after
> >     a pre-done hack for this or even an ECU definition file if one
> exists.
> >     I have been searching for months but have had no success. I have
> >     even tried to disassemble the code myself, however the EPROM is a
> 128k
> >     one, and nearly all freeware/shareware disassemblers only allow 64k
> >     images.
> >
> >     If no one knows of any ECU definition file or hack file, does any one
> >     know of a disassembler that would be capable of disassembling the
> 128k
> >     image?
> >
> >     Thanks,
> >     Simon
> >     _______________________________________________
> >     Diy_efi mailing list
> >     Diy_efi at diy-efi.org
> >     http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >
> > ------------------------------------------------------------------------
> > Do you Yahoo!?
> > Yahoo! Mail - Easier than ever with enhanced search. Learn more. 
> > <http://us.rd.yahoo.com/evt=29916/*http://info.mail.yahoo.com/mail_250>
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Diy_efi mailing list
> >Diy_efi at diy-efi.org
> >http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >  
> >
> 
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.3 - Release Date: 15/03/2005
> 
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> 
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.3 - Release Date: 15/03/2005
>  
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 18/03/2005
>  
> 
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>