[Diy_efi] Remapping Chev Lumina V8

[Jim Butterfield]

Lee,
  You ask about programming and ODB2 car, with my digital Horsepowe Power  tuner I can program lots in my 3800 grand prix PCM... I know HPtuners  also has a wide aray of products it supports
  
  jim
  

"Lee M. Lemoine" <llemoine at gmail.com> wrote:To  directly address this:  As with any vehicle built after '96, most  are OBD2.. (at least here in the US)  and seeing as Holden in AU  is part of GM, it'd probably be safe to guess that the same is true  down that way.   I'm yet to see any info on how to reprogram  OBD2 computers, however, it can be done somehow.   It usually  entailed sending the ECU out for 'reflashing' but i've never seen the  equipment or software...  

--LL

On 11/25/05, Preggie Govender <pgovender at shivanet.co.za> wrote:  Thanx Geoff for the link

Car definitely in South Africa :)

_____ Original message _____
Subject:        Re: [Diy_efi] Remapping Chev Lumina V8
Author: "Geoff Harrison" <  geoff_h at smartchat.net.au>
Date:           25th November 2005 12:58:39

You might try this site. I have had a look at some of the local

forums, all talk about
taking it somewhere for this that and the  
other.
http://www.vcm-suite.com.au/
This forum seems better than the others I have seen.
www.ls1.com.au/

BTW the car in question is also avail in South Africa. I have  
heard, but have no
hard evidence that there are some in the Texas and Florida
areas.

Good luck with the tune.
Geoff
----- Original Message -----
From: "Dan Zorde" <  dzorde at erggroup.com>
To: <diy_efi at diy-efi.org>
Sent: Friday, November 25, 2005 5:01 PM
Subject: [Diy_efi] Remapping Chev Lumina V8


> Its an Aussie Commodore allright. They are exported as Chevy  
> Lumina to
> Saudi Arabia (with high speed windshield wipers kits).
> I think the closest you'll get in the US market is the 2 door
> version
> (yes, the Pontiac GTO).
> Same engine,   5.7 alloy V8, tranny, brakes and diff.
>
> Someone here in Oz should be able to help with the ECU, I
> think it is an
> all speed density system.
>
> Dan
> ERG Transit Systems
  > 247 Balcatta Road Balcatta WA 6021 Australia
> Tel: + 61 8 9273 1558 Fax: +61 8 9273 1570
> Email: dzorde at erggroup.com Website: www.erggroup.com  
>
>
> <Looks like an Aussie Commodore. But hey, the Holden hasn't
> been Aussie
> for
> <quite some time. But they tell us it is.
> <
> <Geoff
>
>  
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
>   http://lists.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
  http://lists.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
  http://lists.diy-efi.org/mailman/listinfo/diy_efi




-- 
Sincerely,

Lee M. Lemoine
http://www.turbochargedsoul.com/  
http://www.snefools.org/  _______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi



		
---------------------------------
 Yahoo! Music Unlimited - Access over 1 million songs. Try it free.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20051125/41be41c1/attachment.html