[Diy_efi] OT ABS scanner

[Lee M. Lemoine]

Jim,

That unit is a pain -- there are no flash codes available, you need a
special unit that goes in-line with the computer, which is usually mounted
somewhere on the firewall, closeby (its a 30a circuit for the hydraulic
pump)... Anyways, the easiest thing to check is that all your wheel sensors
are working... a lot of times the j and n-body cars had little connectors on
the front wheel subframes that got corroded or came unconnected... check it
out, its usually right near where the subframe meets the A-arm... there is
another disconect point further up as well, almost on the top of where the
axles are....

--LL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20051009/626173a7/attachment.html