[Diy_efi] AIR fitting

[Steve Ravet]

> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org 
> [mailto:diy_efi-bounces at diy-efi.org] On Behalf Of Mike Frels
> Sent: Friday, September 09, 2005 8:01 PM
> To: diy_efi at diy-efi.org
> Subject: Re: [Diy_efi] AIR fitting
> 
> 7/8 inch!!!? The ones on my manifolds are more like around 
> 1/2 inch. One at each exhaust port. Are we talking about the 
> same thing?

Mine aren't nearly 7/8.  As Mike said, they're more like 3/8" or 1/4" SS
tubing with what looks like a flare nut, but until it comes off I don't
know if it's inverted flare or what.

By the way, if you're interested in removing the AIR pump from a Chevy
4.3/5.0/5.7 but don't think you can because the belt would interfere
with itself, there's an article on thirdgen.org that shows a different
routing with a slightly longer belt that works great.

When I get the tubes out I'll post a picture of what they look like.

--steve