[Diy_efi] Forced open loop

[Fehn, Ron G]

i set blm high and low to 128 and same on INT  the i set max temp to
enable CL of something like 151 C or 224F.

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
On Behalf Of loomanb at chartermi.net
Sent: Thursday, September 15, 2005 4:02 PM
To: diy_efi at diy-efi.org
Subject: Re: [Diy_efi] Forced open loop


  Worked for my EGR on mine. Set it to turn on at 255mph I think. Isn't
there a rpm switch in there also for closed loop? I am using tunerpro so
I'm not sure about tunercat, but I think it is in mine.
> 
> From: Bret Levandowski <skishop69 at yahoo.com>
> Date: 2005/09/15 Thu PM 03:28:35 GMT
> To: diy_efi at diy-efi.org
> Subject: [Diy_efi] Forced open loop
> 
> On the GM TBI systems, is there a way to force it to stay in open loop
operation without setting a code? I'm using the Tunercat program and it
has a parameter for coolant temp for closed loop op. Can I set that for
say, 250F and have it stay in OL?   Thanks, Ski
>  
> 
> 		
> ---------------------------------
> Yahoo! for Good
>  Click here to donate to the Hurricane Katrina relief effort. 
> 
__________________________________________________________________
If you do not want to receive future unsolicited commercial email 
advertisements or promotions from American Family you may opt-out
by visiting the following website:
<https://www3.dncsolution.com/SSL/DNESolution/OptOutCode/OptOut.aspx?el=5 >
Note: After opting-out, you may receive emails that you have
specifically requested from American Family.  If you are a current
American Family customer, you may still receive transactional emails
regarding your existing policies or accounts with American Family.
American Family Mutual Insurance Company and its affiliates utilize
the PossibleNow DNESolution to administer this email opt-out process.