[Diy_efi] GM V6 three connector DIS ign module pinout?

[Lee M. Lemoine]

Is this a 6 cylinder?  i've got a few spare modules hanging around...

-- Lee


On 4/17/06, Tomas J. Sokorai Sch. <tsokorai at xperts.cl> wrote:
>
> On Monday 17 April 2006 10:43, Lee M. Lemoine wrote:
> > Ok so a straight ignition module -- not an actual ECM then?
> >
> > This is from my car... ('93 Chevrolet Cavalier Z24, 3.1 liter MPFI V6
> with
> > DIS)
> >
> http://garrett.turbochargedsoul.com/help/Ignition%20-%20Complete%20Picture
> .
> >gif
> >
> > And the connector pinouts (which pin is A / B/ etc)
> >
> http://garrett.turbochargedsoul.com/help/Ignition%20-%20no%20description).g
> >if
>
> Thanks, that's what I was looking for!! ... but the sad part (for my
> wallet ;) , is that I wired the module right according to these pinouts
> when
> I tried to test it, and seems my ebay module came DOA.
>
> --
> Tomas J. Sokorai Sch.
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>



--
Sincerely,

Lee M. Lemoine
http://www.turbochargedsoul.com/
'06 Subaru Legacy GT Limited - 250/250 AWD 5EAT
'93 Chevy Cavalier Z24 Convertible - 300/330 FWD 5MT (Mclaren Turbo!)