[Diy_efi] 93 pontiac grand prix... I think the 3.1L auto

Jim Butterfield jimbutterfield
Tue Aug 8 19:04:31 UTC 2006


Thanks Lee, I got to get with my buddy and see this engine before he buys it to see if it is what he thinks it is... I'll post more when I find out
   
  jim

"Lee M. Lemoine" <llemoine at gmail.com> wrote:
  Hey Jim,

The 3.1 is a pretty versatile motor -- depending upon what application your
removing it from (in your case, a W-body) it'll have a 127727 ECM -- very
modifiable. I personally have a Mclaren 3.1 turbo which is essentially the
same block with a little different casting (oil returns, different oil
distribution system) -- and am running a haltech E6GM re-wired to work with
this engine... If i had known that three years later there'd be as much
"plug and play" stuff out for the 3.1, i'd certainly have waited.

I'm sure there are many programs out there, GMECM seems neat, although i
haven't used it to do more than obtain the base timing tables for the
3.1turbo maps... (so i can program them into my haltech for base
tuning)
however, it does support romulation -- running code off of a virtual "prom"
so that you can change values in real time... Sounds maybe more like what
you may want to get into -- and those can be had for about $200 or so.

The stock ECM will be pretty quick to respond -- even to mild motors..
Mine's got (okay, HAD... before i melted my pistons) a pretty wild cam, a
ton of headwork, and the stock (for the mclaren) mahle low compression
pistons...

Let me know if there is anything you may need some help with, i actually
picked up my 6th 3.1 yesterday, and plan to rebuild it to replace the
mclaren block currently in my vehicle.

-- Lee

On 8/8/06, Jim Butterfield wrote:
>
> Hi all,
> I mostly work with ODBII type pontiacs, so im unfamilar... a buddy is
> wanting to take the eng trans from a 93 GP and use it in a sand rail... what
> type of computer does this have and how programable is it??? He will want to
> work the engine a little with a cam headers and even maybe some head work,
> so the VE for the speed density system will be a bit out of wack im sure....
> any help is appreciated... I will be searching some of the w-body/grand am /
> N-body sites as well for info, but was curious what this group has...
>
> thx
> jim
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Everyone is raving about the all-new Yahoo! Mail Beta.
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> Main WWW page: http://www.diy-efi.org/diy_efi
>



-- 
Sincerely,
Lee M. Lemoine
KB1NQI - Amateur Radio
http://www.turbochargedsoul.com/
'06 Subaru Legacy GT Limited - 250/250 AWD 5EAT
'93 Chevy Cavalier Z24 Convertible - 300/330 FWD 5MT (Mclaren Turbo!)
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page: http://www.diy-efi.org/diy_efi


 		
---------------------------------
Get your email and more, right on the  new Yahoo.com 



More information about the Diy_efi mailing list