[Diy_efi] OBD 1.5 data stream

[don.broadus at exeloncorp.com]

I installed a 1994 16191947 ECM in a non FI vehicle. A 12 pin  ALDL was in the donor car and had  a black wire which I grounded on term (A) and a orange black on term (M) that I connected to the ECM blue connector D12. Just checking if this is correct since my scan tool wont link up. The pin out I have only list the A and M term on the ALDL. From what I've read about the OBD 1.5 the donor car should have had a 16 pin ALDL.   Thanks for the help



-----------------------------------------
**************************************************
This e-mail and any of its attachments may contain Exelon
Corporation proprietary information, which is privileged,
confidential, or subject to copyright belonging to the Exelon
Corporation family of Companies.
This e-mail is intended solely for the use of the individual or
entity to which it is addressed.  If you are not the intended
recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this e-mail is strictly
prohibited and may be unlawful.  If you have received this e-mail
in error, please notify the sender immediately and permanently
delete the original and any copy of this e-mail and any printout.
Thank You.
**************************************************