[Diy_efi] Source for inexpensive fuel/oil pressure sensors?

don.broadus at exeloncorp.com don.broadus
Fri Dec 29 21:05:25 UTC 2006


Thanks for the input, sounds like a good way to go.

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of David Allen
Sent: Friday, December 29, 2006 2:17 PM
To: diy_efi at diy-efi.org
Subject: Re: [Diy_efi] Source for inexpensive fuel/oil pressure sensors?


  I know nothing of the Chrysler transmission; however Delco makes a 
stand-alone transmission controler with LOTS of parameters. It's the16128420 
transmission ECM. Natively used to control a 4L80E in diesel trucks which 
have no engine ECM. I think it may be limited to 4-speeds (or less) with TCC 
clutch.
  It is OEM hardware (read-well built) and is supported by TunerCAT and uses 
a socketed EPROM and can be real-time tuned with an emulator. Also 
diagnostics supported by many scan tools including EASE and Snap-On.
  No idea what sort of interface adapter hardware would need to be created 
to allow it to work with a non-native tranny.  I'm fixing to jump in 
head-first and setup a stand-alone 4T65E based on it.  Will be fun!
  Later,
David

>
> Is that trans the front drive transaxle for the Concord ?  That transaxle 
> is
> the most compact I've seen and wondered could you run it with just  a 
> trans
> module or does it run from the car
> PCM ?

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi

-----------------------------------------
**************************************************
This e-mail and any of its attachments may contain Exelon
Corporation proprietary information, which is privileged,
confidential, or subject to copyright belonging to the Exelon
Corporation family of Companies.
This e-mail is intended solely for the use of the individual or
entity to which it is addressed.  If you are not the intended
recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this e-mail is strictly
prohibited and may be unlawful.  If you have received this e-mail
in error, please notify the sender immediately and permanently
delete the original and any copy of this e-mail and any printout.
Thank You.
**************************************************





More information about the Diy_efi mailing list