[Diy_efi] EFI lift pumps to swirl pot?

Chris Wilson chris
Fri Feb 17 13:12:03 UTC 2006



  17/02/2006 13:10

No, the lift pump feeds the pot, and the high pressure pumps are fed BY
the pot, and in turn feed the rail, at say 36 PSI, the none pressurised
return flow goes to the main tank or the swirl pot, so unless you
restrict the return from the pot to the tank (which some do, slightly)
the pot is under no pressure. Thanks for the feedback.

-- 
       Best Regards,
                   Chris Wilson.





More information about the Diy_efi mailing list