[Diy_efi] Big Caddy
Mike V
efi
Thu Jan 5 19:31:39 UTC 2006
Thanks guys. Good data.
I will be careful with the TV cable adjustment,
so as not to let the smoke out of the trans.
MV
At 12:51 PM 1/5/2006 -0500, you wrote:
>You can do a google, teoma, etc search on it. Found several websites that
>gave information about how to set it up. In the end I used those
>instructions and measurements taken from my '92 caprice and the TBI unit
>from my 85 just to verify where the cable should attach to the throttle lever.
>
>I have to get to class now so I don't have time to find the urls.
>
>btw, without the cable set up correctly you'll fry the transmission quickly.
>
>----------------------------------
>Mike, if you don't know, getting the TV cable set up correctly is very
>important on the 700R4. It looks like the kickdown cable from a THM but
>isn't. It controls clutch pressure and a drive around the block with it
>disconnected can toast a transmission (I'm told). Adjusting it isn't
>difficult but it does need to be done: When the throttle is wide open,
>the TV cable should also be fully extended.
More information about the Diy_efi
mailing list