[Diy_efi] LInk engine management user

[Remy Sabale]

Hi Tim,
  I want to upgrade it to V4. How much it will cost upgrading this Link
ecu?

Best regards,
Remy

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
On Behalf Of Van Setten, Tim @ ACSSD
Sent: Wednesday, January 11, 2006 5:58 AM
To: 'diy_efi at diy-efi.org'
Subject: RE: [Diy_efi] LInk engine management user

That LINK ECU is the older one (about 1999) that will not talk to a PC.
Only a hand-held programmer will work with that.

In 2003 it was upgraded to what it called the LEM4 or version 4 (LINK
ECU
Software marked D42V4).

As for you, your ECU can be upgraded to the version 4.  It is just a
chip
change.  (They use a MC68HC11).  The newer software also has the ability
to
"Self Tune" the fuel map if the O2 sensor option is turned on.  Since
the
newer chip can talk to a PC (using the serial LINK or USB LINK), the PC
can
save your configurations and all the different mappings you can come up
with.  It can still be programmed by the hand programmer.
The software for the PC is free from LINK's website. (PC LINK Version
2.5).

If you want to upgrade, I can get you that information......Tim.



-----Original Message-----
From: Aaron Bunch [mailto:nitrusmr2 at yahoo.com] 
Sent: Friday, December 23, 2005 12:10 PM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] LInk engine management user

I doubt the serial liunk will work for that. You will
probably need the hand held programmer, but you should
call Link to confirm.

Aaron

--- Remy Sabale <remy.sabale at gatepacific.com> wrote:

> I'm using the older version of LINK wire in ecu.
> Here is the picture of the LINK ECU I have, sorry
> for the poor image
> quality
> 
>
http://img.photobucket.com/albums/v399/ogip/link2.jpg
> http://img.photobucket.com/albums/v399/ogip/link.jpg
> 
> Is a serial link work properly in this ECU for
> tuning?
> 
> By the way, I'm planning to use it my 4age 16v
> engine with ITB set-up
> 
> thanks
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.16/225 - Release Date:
1/9/2006