[Diy_efi] LInk engine management user

[Van Setten, Tim @ ACSSD]

Ok, first open up the LINK 1 ECU and if the board is marked 1999, then you
can upgrade it.
The chip is $100.00 and you can install it (52 Pin PLCC in a socket) or you
can send them the computer and they can put it in for you.  (Same price).

He also has the chips for the LINK Plus, Version LP1.4 for the same price.
(Sorry, but no you can't put a LINK Plus chip in a LINK 1 computer).

They also have the serial LINK's for $75.00.  You can also get the USB
LINK's from them also.

The LINK distributor that has these is ORBS (Off Road Buggy Supply) in Yuma,
Arizona.  800-231-8156.  Ask for Richard (Owner).



-----Original Message-----
From: Remy Sabale [mailto:remy.sabale at gatepacific.com] 
Sent: Tuesday, January 10, 2006 6:17 PM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] LInk engine management user

Hi Tim,
  I want to upgrade it to V4. How much it will cost upgrading this Link
ecu?

Best regards,
Remy