[Diy_efi] LInk engine management user

[Remy Sabale]

Hi Tim,
  What is the email address of Richard so I can contact him directly.

Regards,
Remy

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
On Behalf Of Van Setten, Tim @ ACSSD
Sent: Tuesday, January 17, 2006 12:26 AM
To: 'diy_efi at diy-efi.org'
Subject: RE: [Diy_efi] LInk engine management user

Hi Remy,

No because I am not a LINK distributor, but I have worked with Richard
at
the shop with all the different LINK products, so that is how I know
about
this.

All I can suggest is that you contact him and see if you can set
something
up.  After all, the chip can be mailed in a regular envelope.
You will need the tool to pull the 52 Pin PLCC chip out of the socket,
and
make sure you get pin 1 back in the correct position.

Then all you need is a "Serial LINK" to communicate with your PC or
laptop.
You can get that from him at the same time.  The program for the PC is a
free download from LINK's web site (PC LINK V2.5). 

If you do this, you might want to use the hand programmer and extract
your
current fuel and ignition map.  Since it will be in percents, they have
a
conversion table as you will have to convert it to absolute numbers (0 -
255).  Then you can reload your map using the PC.

They (LINK) have the manuals on the web site also for downloads.  You
will
want the LEM4 one.  It is in an Adobe pdf format.

I suggest that you download the manuals (LEM4 and the PC Tuning one),
and
then read them and make sure that all of this will work for what you
want to
do.
If it is, then see if you can set something up.

If you need more help, just ask.....Tim.



-----Original Message-----
From: Remy Sabale [mailto:remy.sabale at gatepacific.com] 
Sent: Monday, January 16, 2006 8:57 AM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] LInk engine management user

Hi Tim,
  I'm located outside the US and here at the Philippines. I'm planning
to upgrade to V4 only. Along as I can tune it to my PC, it's is fine for
me.
Can I buy an upgraded chips( 52 Pin PLCC) from you? 

Regards,
Remy
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.19/231 - Release Date:
1/16/2006