[Diy_efi] Need some help identifying injectors

[Stew Pididiot]

Yes--thanks Mark.  Lookinng at the BLM tables generated running the 5235132
set I figured they were too lean for a 5.0 and was figuring that they were
4.3 injectors--or just about anything <5.0 injectors.

I popped in the 5235279 set and the car is running very well!  Most of the
BLM table numbers are 128 +/- and within decent limits.




On 7/16/06, mark krawczuk <krawczuk at dodo.com.au> wrote:
>
> hi, this any good ?
>
> http://www.usenetcars.com/archive/topic.php/t-98605.html
>
> had a  bit of a look and the number u gave came up ...
>
> "latest update: I swapped the injectors with 2 units from a junk car
> (85or86
> Caddy with 4.5L RWD). I cound not verify if the injectors are calibrated
> the
> same as the originals (original: 5235203; used: 5235132). result: engine
> still chuga-chugs, too rich."
>
> any help  ?
>
> mark k
>
>
> ----- Original Message -----
> From: "Stew Pididiot" <stewpididiot at gmail.com>
> To: <diy_efi at diy-efi.org>
> Sent: Monday, July 17, 2006 11:17 AM
> Subject: [Diy_efi] Need some help identifying injectors
>
>
> > Hello all--
> >
> > I have a set of TBI injectors stamped with part number 5235132.  I can't
> > seem to locate any information on these regarding which engine they are
> > supposed to match.
> >
> > I also have a set of 5235279 injectors--are these good for a 305?  (I'm
> > actually installing them on a Ford 302)  According to the chart at
> > http://www.diy-efi.org/gmecm/component_info/tbi_injectors.html  they
> work
> > on
> > a 305, but I'm pretty sure the car I pulled them off had a 350 in it.
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> > Main WWW page:  http://www.diy-efi.org/diy_efi
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> Main WWW page:  http://www.diy-efi.org/diy_efi
>