[Diy_efi] Some problems with my FI conversion

[Jens Jensen]

Uh oh - Busted!

Bill has been helping me thru this and I am grateful.


-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
On Behalf Of Bill USN-1
Sent: Tuesday, July 18, 2006 3:53 PM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] Some problems with my FI conversion


Jens

It means you didn't follow the instructions properly!

:-)

Bill
USN-1


-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
On Behalf Of Jens Jensen
Sent: Tuesday, July 18, 2006 8:44 PM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] Some problems with my FI conversion

Well - I would not say that I had got the motor to 2000 RPM, but this
does sound like what I saw.  The jump from 0 to 20 is instant - as is
the jump from 20 back to 0 when I close the throttle.  

Chance this could happen at lower RPM than 2000?

If my issue is because of the module's built in timing - and I am having
the same problem with the bypass both plugged in and unplugged - What
would that mean?



-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
On Behalf Of Steve Ravet
Sent: Tuesday, July 18, 2006 3:22 PM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] Some problems with my FI conversion


 

> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]

> On Behalf Of Jens Jensen
> Sent: Tuesday, July 18, 2006 12:38 PM
> To: diy_efi at diy-efi.org
> Subject: [Diy_efi] Some problems with my FI conversion
> 
> I figure that either the EST is screwed or there is a problem with the

> GM / Holley merge.  Before I tear into the distributor - is there any 
> reason that the timing would change even with the bypass disconnected?
> 

The module has built in timing.  The curve is flat, with a sudden jump
around 2000 rpm, then flat again.  This is what is used if the computer
is disconnected.  Is that what you saw?

--steve


-- IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended
recipient, please notify the sender immediately and do not disclose the
contents to any other person, use it for any purpose, or store or copy
the information in any medium.  Thank you.

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi