[Diy_efi] Tiny injectors and fuel pump?

[Bobby Yates Emory]

Nathanael,

Some BMW's also used the cold start injectors (80's 633 for one - but you
would probably want one from a 3 series).

Bobby


On 6/14/06, nathanael portelli <silent_thunder888 at yahoo.com> wrote:
>
> Hi Keith,
>
> Thanks for the tip, I never knew that there were specific injectors for
> cold
> enrichment! I'll try looking for those, even though they could still be a
> bit rare
> over here.
>
> At the same time I will try to contact a Zoomer forum and see if they can
> source
> parts for me. The zoomer parts are very PRETTY for this application also
> because the pump has an in-built regulator, so the fuel system is "only"
> the
> pump and the injector . Then the only thing left for me to add would be a
> bubble
> trap [a tiny tank], with a cutoff switch to the ECU so that I avoid
> getting air into
> the HP line, then I wont have to worry about switching from main to
> reserve lines
> before I drop below the lower main level. [after all, building the rest of
> the system
> is already enough without having to worry about regulation]
>
>
> Nathanael
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>



-- 
Toward freedom,

Bobby Yates Emory