[Diy_efi] weatherpack connectors or something like them

[Rick McLeod]

Well, evidently what I'm looking for is NOT a traditional 'weatherpack' connector, although it's on a GM auto!

I'm looking for the 5-conductor connector that mates to the Bosch MAF sensor on early GM TPI systems.

The only 'weatherpack' connectors I can locate are 6 pin or 4 pin, and are somewhat larger pin size. This is a very similar to the weatherpack, but smaller or higher density.

I'm sure someone else has run across this challenge, so your help is appreciated.

and yes, the obvious is the GM dealer, but they don't have the 'male' connector that would mimic the MAF end, only the female end that is actually on the cable. The female end is not the challenge, as I've got a salvaged harness that I could butcher one off of, but I'm looking to keep in intact unless necessary to butcher it.

Therefore, I'm looking for both M and F, what I'm trying to do is create a diag cable that I can insert inline to a MAF to monitor the signals to diagnose either bad MAF's or the control circuits such as the burn-off power and airflow signals.

Thanks as always.


----- Original Message ----
From: Jim Kyser <jimkyser at ieee.org>
To: diy_efi at diy-efi.org
Sent: Tuesday, April 3, 2007 4:07:47 PM
Subject: Re: [Diy_efi] weatherpack connectors


MJM National sells weatherpack connectors on eBay. They sell both 
pre-packaged kits and smaller quantities. Here is a link to their eBay 
store. They have a 5 pack of those 4 pin connectors for $4 + $1sh and 
the a 5 pack of the shrouds for $2.50 + $1sh. Pins and terminals are 
like $2.50 + $1 for shipping for a package of 25. They combine shipping 
on multiple items. I have bought from them and they ship out quickly.

http://stores.ebay.com/MJM-National-Inc_Weather-Pack_W0QQcolZ2QQdirZQ2d1QQfsubZ12QQftidZ2QQtZkm

Jim Kyser
1946 Willys CJ-2A w/4.1 liter Buick V6 w/TBI in progress

Rick McLeod wrote:
> I am aware of Del-City for these, I ordered some, but they backordered them. Does anyone know of another cheap vendor on 1sy-2sy quantity, I need to repair a cable ASAP and am up the proverbial backorder tree!
>
> I'm looking for 4-pin flat male housings and pins.
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> Main WWW page:  http://www.diy-efi.org/diy_efi
>
>   

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi