[Diy_efi] O2 sensor mounting

[Mike Yates]

It's a '65 Vette hide the prick so what if you have to replace it
every 6-months or so. you're dealing with a classic not a track
beater.

Mike

On Mon, 16 Apr 2007 08:55:45 -0700, you wrote:

>I am installing my Hooker side exhaust on my '65 Corvette. I would like to mount my O2 sensor at about 5:o'clock in the 4" tube so that it will be not hanging out there. The collector with this system is outside of the fender. My choices would be on top or down low on the inside to hide it. I hear that it should be pointing down so condensation will run off. The sensor has been at about 4:o'clock in my old system for the last 2 years will no ill efects. If it's gotta hang out so be it. What should I do, anyone?
>Frank
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi