[Diy_efi] weatherpack connectors or something like them

Ben Heidorn b_the_j
Tue Apr 17 01:24:10 UTC 2007


There is no pigtail there i was refering to making you own


>From: Rick McLeod <dunvegan at sbcglobal.net>
>Reply-To: diy_efi at diy-efi.org
>To: diy_efi at diy-efi.org
>Subject: Re: [Diy_efi] weatherpack connectors or something like them
>Date: Sun, 15 Apr 2007 12:39:51 -0700 (PDT)
>
>Well, I didn't realize there was a pigtail here, I'll look further at the 
>harness now and see if I can do that, sure would be easier.
>
>I'm not familiar w/ what you're calling a 'duesche' connector, but I'm sure 
>I'll recognize it when I see it.
>
>Thanks for jumping in.
>
>BTW, if I don't have that on my car, does anyone know if the MAF connector 
>is a 150 series, or 280 series. Waytek doesn't list a 5 pin (nor have I 
>found elsewhere) in 150 except 150-GT and all I find there is a kit of all 
>different sizes for over $80, pircey for what I'm trying to do.
>
>as always, all help appreciated.
>
>
>----- Original Message ----
>From: Ben Heidorn <b_the_j at hotmail.com>
>To: diy_efi at diy-efi.org
>Sent: Sunday, April 15, 2007 2:09:42 PM
>Subject: RE: [Diy_efi] weatherpack connectors or something like them
>
>
>Why are you restricting yourself to plug in to the MAF, go 4-6inches down
>the harness using a duesche style 6 pin, blanking one of the holes. you can
>pick these up at Crown lift trucks or OKI, probably hyster or yale too but
>these are or competitors so im not sure.
>
>
> >From: Rick McLeod <dunvegan at sbcglobal.net>
> >Reply-To: diy_efi at diy-efi.org
> >To: diy_efi at diy-efi.org
> >Subject: [Diy_efi] weatherpack connectors or something like them
> >Date: Sun, 15 Apr 2007 08:55:51 -0700 (PDT)
> >
> >Well, evidently what I'm looking for is NOT a traditional 'weatherpack'
> >connector, although it's on a GM auto!
> >
> >I'm looking for the 5-conductor connector that mates to the Bosch MAF
> >sensor on early GM TPI systems.
> >
> >The only 'weatherpack' connectors I can locate are 6 pin or 4 pin, and 
>are
> >somewhat larger pin size. This is a very similar to the weatherpack, but
> >smaller or higher density.
> >
> >I'm sure someone else has run across this challenge, so your help is
> >appreciated.
> >
> >and yes, the obvious is the GM dealer, but they don't have the 'male'
> >connector that would mimic the MAF end, only the female end that is
> >actually on the cable. The female end is not the challenge, as I've got a
> >salvaged harness that I could butcher one off of, but I'm looking to keep
> >in intact unless necessary to butcher it.
> >
> >Therefore, I'm looking for both M and F, what I'm trying to do is create 
>a
> >diag cable that I can insert inline to a MAF to monitor the signals to
> >diagnose either bad MAF's or the control circuits such as the burn-off
> >power and airflow signals.
> >
> >Thanks as always.
> >
> >
> >----- Original Message ----
> >From: Jim Kyser <jimkyser at ieee.org>
> >To: diy_efi at diy-efi.org
> >Sent: Tuesday, April 3, 2007 4:07:47 PM
> >Subject: Re: [Diy_efi] weatherpack connectors
> >
> >
> >MJM National sells weatherpack connectors on eBay. They sell both
> >pre-packaged kits and smaller quantities. Here is a link to their eBay
> >store. They have a 5 pack of those 4 pin connectors for $4 + $1sh and
> >the a 5 pack of the shrouds for $2.50 + $1sh. Pins and terminals are
> >like $2.50 + $1 for shipping for a package of 25. They combine shipping
> >on multiple items. I have bought from them and they ship out quickly.
> >
> >http://stores.ebay.com/MJM-National-Inc_Weather-Pack_W0QQcolZ2QQdirZQ2d1QQfsubZ12QQftidZ2QQtZkm
> >
> >Jim Kyser
> >1946 Willys CJ-2A w/4.1 liter Buick V6 w/TBI in progress
> >
> >Rick McLeod wrote:
> > > I am aware of Del-City for these, I ordered some, but they backordered
> >them. Does anyone know of another cheap vendor on 1sy-2sy quantity, I 
>need
> >to repair a cable ASAP and am up the proverbial backorder tree!
> > >
> > > I'm looking for 4-pin flat male housings and pins.
> > > _______________________________________________
> > > Diy_efi mailing list
> > > Diy_efi at diy-efi.org
> > > Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> > > Main WWW page:  http://www.diy-efi.org/diy_efi
> > >
> > >
> >
> >_______________________________________________
> >Diy_efi mailing list
> >Diy_efi at diy-efi.org
> >Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >Main WWW page:  http://www.diy-efi.org/diy_efi
> >_______________________________________________
> >Diy_efi mailing list
> >Diy_efi at diy-efi.org
> >Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >Main WWW page:  http://www.diy-efi.org/diy_efi
>
>_________________________________________________________________
>Exercise your brain! Try Flexicon.
>http://games.msn.com/en/flexicon/default.htm?icid=flexicon_hmemailtaglineapril07
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi

_________________________________________________________________
MSN is giving away a trip to Vegas to see Elton John.? Enter to win today. 
http://msnconcertcontest.com?icid-nceltontagline





More information about the Diy_efi mailing list